From: Emad (emad@zakq8.com)
Date: Sun Jun 22 2003 - 13:20:58 GMT-3
John,
I was mainly talking about the example at the end of this URl , what
about if I removed the configurations from the main ineterface and make
it only on the subinterface , is it right or I'm gonna lose points for
that?
Regards
-----Original Message-----
From: John Matijevic [mailto:matijevi@bellsouth.net]
Sent: Sunday, June 22, 2003 7:15 PM
To: Emad ; ccielab@groupstudy.com
Subject: Re: RSVP
Emad,
It looks like you configure it on both main and sub with frame-relay,
from
reading this doc, it looks like you can set different values for the
main
and sub or use the same. Here is the doc for futher reference.
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configur
ation_guide_chapter09186a00800b75c7.html#95271
Sincerely,
Matijevic
----- Original Message -----
From: "Emad " <emad@zakq8.com>
To: <ccielab@groupstudy.com>
Sent: Sunday, June 22, 2003 11:54 AM
Subject: QoS: RSVP
> Folks,
> While I'm reading DOC CD about RSVP , I get confused with the command
> "IP" rsvp bandwidth," with the frame-relay , is it required to be
> configured on the main interface and the subinterface also or just on
> the subinterfaces only?
> Please advise
> thanx
>
>
>
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:05 GMT-3