From: Oliver Ziltener (ziltener@netcloud.ch)
Date: Mon Jun 23 2003 - 17:34:49 GMT-3
Another stuff to dot1x..
Did you try the 802.1x with standard Windows OS?
Both XP and Win2000 works not fine (timeout dhcp, double authentication).
Try the Aegis Client from www.mtghouse.com
have fun
Oliver
-----Urspr|ngliche Nachricht-----
Von: Nguyen Hoang Long [mailto:ng-hlong@hn.vnn.vn]
Gesendet: Donnerstag, 19. Juni 2003 04:16
An: Snow, Tim; 'Emad '
Cc: ccielab@groupstudy.com
Betreff: Re: CAT3550:dot1x command
Yes, I think so, that's why they list :
Configuring the Switch-to-RADIUS-Server Communication (required)
link:
http://127.0.0.1:8080/cc/td/doc/product/lan/c3550/12111ea1/3550scg/sw8021x.ht
m#xtocid6
Long
----- Original Message -----
From: "Snow, Tim" <timothy.snow@eds.com>
To: "'Emad '" <emad@zakq8.com>
Cc: <ccielab@groupstudy.com>
Sent: Thursday, June 19, 2003 4:28 AM
Subject: RE: CAT3550:dot1x command
> it doesn't look like local authentication works which is why they state
"use
> atleast one of the following keywords"
>
> Tim
>
> -----Original Message-----
> From: Emad [mailto:emad@zakq8.com]
> Sent: Wednesday, June 18, 2003 4:54 PM
> To: 'Snow, Tim'
> Cc: ccielab@groupstudy.com
> Subject: RE: CAT3550:dot1x command
> Importance: High
>
>
> It was enabled , is that what you mean?
>
> -----Original Message-----
> From: Snow, Tim [mailto:timothy.snow@eds.com]
> Sent: Wednesday, June 18, 2003 11:48 PM
> To: 'Emad '
> Cc: 'ccielab@groupstudy.com'
> Subject: RE: CAT3550:dot1x command
>
> Looking at the 3550 doco, it says
>
> "aaa authentication {default} method1 method2
>
> Enter atleast on of these keywords
>
> group radius - Use the list of all Radius servers for authentication
> none - use no authentication.
>
> I'll keep looking but I don't see an example for local authentication...
>
> Do you do a "show dot1x" what state is the port in?
>
> Tim
>
> -----Original Message-----
> From: Emad [mailto:emad@zakq8.com]
> Sent: Wednesday, June 18, 2003 11:56 AM
> To: ccielab@groupstudy.com
> Subject: CAT3550:dot1x command
>
>
> Folks,
> I was testing he command dot1x on my switch but I failed to test it as
> my laptop gave me " windows was unable to find a certificate to log you
> on to the network " after finishing this configurations:
>
> aaa new-model
> aaa authentication dot1x default local
>
> interface FastEthernet0/18
> switchport access vlan 3
> switchport mode access
> no ip address
> dot1x port-control auto
>
> I think the configuration is right and straight forward but how can I
> send the username and password from the connected device?
>
> thanx
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:07 GMT-3