From: Charles Church (cchurch@wamnet.com)
Date: Tue Jun 24 2003 - 14:29:23 GMT-3
I don't think there is any NBAR on 2500s. Just not enough memory to do it.
It's available on 1700, and 2600 and above. Not sure about the older
4000/4500s though. 12.2 has most NBAR support, but 12.2T has some more
features, like support for Kazaa, etc. But really, it's just a little more
protocol support. Anything supporting NBAR should be sufficient for
learning the basics.
Chuck Church
CCIE #8776, MCNE, MCSE
Wam!Net Government Services
13665 Dulles Technology Dr. Ste 250
Herndon, VA 20171
Office: 703-480-2569
Cell: 703-819-3495
cchurch@wamnet.com
PGP key: http://pgp.mit.edu:11371/pks/lookup?search=chuck+church&op=index
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
SHARMA,MOHIT (HP-Germany,ex1)
Sent: Tuesday, June 24, 2003 1:01 PM
To: ccielab@groupstudy.com
Subject: Recommended IOS
Hi All,
Could somebody please advice, which is the most suitable IOS, I should use
for my 2500's and 7500's for my LAB.
I tried some, but a lot of the releases do not have support for NBAR and I
find different commands for different releases.
Checked the archives but the previous discussion was not really closed.
Thanks,
Mohit.
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:08 GMT-3