From: Brian Dennis (brian@labforge.com)
Date: Thu Jun 26 2003 - 05:25:09 GMT-3
Split-horizon for RIP and IGRP is disabled for physical Frame-relay
interfaces. Split-horizon is always enabled for EIGRP by default.
The "ip split-horizon" interface command relates only to RIP and IGRP.
If you want to disable split-horizon for EIGRP use the "no ip
split-horizon eigrp <AS>" interface command.
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Wei Zou (wzou)
Sent: Wednesday, June 25, 2003 5:58 PM
To: ccielab@groupstudy.com
Subject: Split Horizon
Hi:
Just want to confirm one thing,
For physical serial interfaces, I believe split horizon is disabled,
while
I heard some voice say that it is enabled for RIP/EIGRP protocol. Can
some
confirm?
Thanks
Wei
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:10 GMT-3