From: Jung, Jin (jin.jung@lmco.com)
Date: Mon Jun 30 2003 - 08:36:54 GMT-3
I think you need "deny" key-word in the profile.
Jin jung,,,
-----Original Message-----
From: Connie Nie [mailto:CNie@EPLUS.com]
Sent: Sunday, June 29, 2003 4:27 PM
To: ccielab@groupstudy.com
Subject: igmp filter
Has anyone played with IGMP filter on 3550? I would like to hear your
experience with it. I have been trying to make it work in the past 2 days,
but with no luck. The configuration is fairly straight forward:
IGMP Profile 10
range 229.0.0.13 229.0.0.13
interface FastEthernet0/4
switchport access vlan 50
switchport mode access
no ip address
ip igmp filter 10
But on the router that is connected to the port where 229.0.0.13 membership
report is supposed to be blocked, I still see membership report for
229.0.0.13, as well as mroute entry. I tried this on dense and sparse mode
configuration, same result.
Any thoughts?
Thank you very much for your help.
Connie
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:14 GMT-3