From: Jonathan V Hays (jhays@jtan.com)
Date: Sat Jul 12 2003 - 12:26:54 GMT-3
So don't watch the subnet, watch host on the opposite end of the link
instead.
dialer-watch list 10 ip 10.1.1.1 255.255.255.255
A good way to test is to remove the VC from the frame switch.
HTH
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> Behalf Of SHARMA,MOHIT (HP-Germany,ex1)
> Sent: Saturday, July 12, 2003 11:02 AM
> To: ccielab@groupstudy.com
> Subject: Dialer watch
>
>
> HI All,
>
> Has any one attemped the lab 36 from ipexpert. IN the Dial
> section, they
> have a requirement that ISDN should come up when FR fails.
> They r using
> dialer-watch, but they use the IP address of the serial
> interface of the
> other router in the dialer-watch list. How will this work,
> since this subnet
> is directly connected????
>
> Also has somebody ever tried using Dialer-watch with
> time-range. I believed
> that since dialer-watch is not based on interesting traffic,
> time-range will
> have no effect in dialer-list used with dialer-watch.
>
> Can somebody please sehd some light here.
>
> Thanks,
>
> Mohit.
>
>
> ______________________________________________________________
> _________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:37 GMT-3