From: John Matijevic (matijevi@bellsouth.net)
Date: Thu Jul 17 2003 - 10:39:36 GMT-3
Hello Connie,
I would say that you do need the host address to be excluded, becuase
otherwise the dhcp server will assume that al ip address in the address pool
subnet area avail for clients.
Here is additional documentation:
The DHCP Server assumes that all IP addresses in a DHCP address pool subnet
are available for assigning to DHCP clients. You must specify the IP address
that the DHCP Server should not assign to clients. To do so, use the
following command in global configuration mode:
Sincerely,
Matijevic
----- Original Message -----
From: "Connie Nie" <CNie@EPLUS.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, July 17, 2003 9:15 AM
Subject: dhcp exclude with both host pool and network pool
> In a configuration as this:
>
> Ip dhcp pool networkpool
> Network 172.16.1.0 /24
> .......
> Ip dhcp pool hostpool
> Host 172.16.1.50 /24
> Hardware hhhh.hhhh.hhhh
> ....
> Ip dhcp exluded-address ????
>
> Does the host address needs to be excluded so the networkpool does not
give
> out 172.16.1.50 address to its user?
> Does anyone know what he order of operation is when you have both "host"
> pool and "network" pool configured for the same network?
>
> Thank you for your help.
>
> Connie
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:43 GMT-3