From: Xy Hien Le (ccnp@hawaiibuyme.com)
Date: Fri Jul 25 2003 - 17:41:31 GMT-3
Hi everyone
quick question:
Why do the vlans still passing through two 3550 switches when both connected
via a Port-Channel bundled by a Channel-group, assigned an ip address on both
sides? I thought Channel Group with a layer 3 address would not permit any
Vlan to pass through... am I missing something?
Any idia on this?
Enclosed are the configs of 2 switches:
interface Port-channel1
no switchport
ip address 10.35.35.1 255.255.255.0
interface FastEthernet0/21
no switchport
no ip address
channel-group 1 mode desirable
!
interface FastEthernet0/22
no switchport
no ip address
channel-group 1 mode desirable
!
interface FastEthernet0/23
no switchport
no ip address
channel-group 1 mode desirable
!
interface FastEthernet0/24
no switchport
no ip address
channel-group 1 mode desirable
........
cat3550-2
interface Port-channel1
no switchport
ip address 10.35.35.2 255.255.255.0
interface FastEthernet0/21
no switchport
no ip address
channel-group 1 mode desirable
!
interface FastEthernet0/22
no switchport
no ip address
channel-group 1 mode desirable
!
interface FastEthernet0/23
no switchport
no ip address
channel-group 1 mode desirable
!
interface FastEthernet0/24
no switchport
no ip address
channel-group 1 mode desirable
!
Thanks in advance,
Xy
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:53 GMT-3