RE: ISIS with dialer watch?

From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Mon Aug 04 2003 - 01:49:23 GMT-3

• Next message: zhang-meng: "TCP/IP volume 1 Chapter 14 config exericse problem"
• Previous message: Quetta Walla: "Re: Migration to 12.2 IOS for CCIE Labs (from the 1st of"
• Maybe in reply to: Hunt Lee: "RE: ISIS with dialer watch?"
• Next in thread: Hunt Lee: "RE: ISIS with dialer watch?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Your configs should work (see below). What version of code are you
running on R2? If you are running older code (i.e. 12.0), try adding the
dialer-group command. There is a bug in older code that will not allow
any packets to be sent across an ISDN connection without it.

r2#ping 49.0001.0192.0168.0505.00

Type escape sequence to abort.
Sending 5, 100-byte CLNS Echos with timeout 2 seconds
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 36/37/40 ms
r2#
Rack12AS>5
[Resuming connection 5 to r5 ... ]

r5#
r5#ping 49.0001.0192.0168.0202.00

Type escape sequence to abort.
Sending 5, 100-byte CLNS Echos with timeout 2 seconds
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 36/48/88 ms
r5#

Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com

• Next message: zhang-meng: "TCP/IP volume 1 Chapter 14 config exericse problem"
• Previous message: Quetta Walla: "Re: Migration to 12.2 IOS for CCIE Labs (from the 1st of"
• Maybe in reply to: Hunt Lee: "RE: ISIS with dialer watch?"
• Next in thread: Hunt Lee: "RE: ISIS with dialer watch?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:52 GMT-3