Re: Frame Relay End-to-End Keepalive

From: ying c (bf5tgh1@yahoo.com)
Date: Tue Aug 12 2003 - 15:47:32 GMT-3

• Next message: John Smith: "RE: Virus Alert - W32.Blaster.Worm"
• Previous message: Connie Nie: "RE: Frame Relay End-to-End Keepalive"
• Maybe in reply to: Peng Zheng: "Frame Relay End-to-End Keepalive"
• Next in thread: MADMAN: "Re: Frame Relay End-to-End Keepalive"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Maybe he's referring to the following?

http://www.cisco.com/en/US/products/sw/iosswrel/ps1830/products_feature_guide09186a0080087a58.html#wp5038

(Pls watch the wrap)
--- MADMAN <dave@interprise.com> wrote:
> What do you mean? Frame relay uses LMI but that
> is only between the
> CPE and the frame switch. There is no OAM
> equivilant in frame but ever
> since about 11.0 a Cisco router p-p subinterface
> will indicate a down
> state if the remote side of the PVC fails, no
> additional config required.
>
> Dave
>
> Peng Zheng wrote:
> > When should I configure this?
> >
> > Could anyone give some examples?
> >
> >
> > __________________________________
> > Do you Yahoo!?
> > Yahoo! SiteBuilder - Free, easy-to-use web site
> design software
> > http://sitebuilder.yahoo.com
> >
> >
> >
>

• Next message: John Smith: "RE: Virus Alert - W32.Blaster.Worm"
• Previous message: Connie Nie: "RE: Frame Relay End-to-End Keepalive"
• Maybe in reply to: Peng Zheng: "Frame Relay End-to-End Keepalive"
• Next in thread: MADMAN: "Re: Frame Relay End-to-End Keepalive"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:57 GMT-3