From: Ram Shummoogum (rshummoo@ca.ibm.com)
Date: Tue Aug 12 2003 - 19:25:36 GMT-3
There is no need to have all watched routes in the dialer map statements.
However, the watched list must cover all the watch routes.
The line will be triggered only after all the routes disappeared from the
routing table.
I have teste this already.
"ccie2be" <ccie2be@nyc.rr.com>@groupstudy.com on 08/12/2003 05:53:45 PM
Please respond to "ccie2be" <ccie2be@nyc.rr.com>
Sent by: nobody@groupstudy.com
To: "Group Study" <ccielab@groupstudy.com>
cc:
Subject: dialer-watch config
Hi all,
In the following example, there's a dialer map for the watched route. See
http://www.cisco.com/warp/public/129/bri-backup-map-watch.html
Does this mean that for every route being watched, one dialer map statement
is
required?
If so, that seems redundant, doesn't it? You have to create a dialer
watch-list where each route to be watched is listed. And, then you have to
create a dialer map statement for each watched route. Why is that?
Thanks, dt
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:58 GMT-3