From: beda jain (bpjain@cisco.com)
Date: Wed Aug 13 2003 - 12:21:18 GMT-3
only i can think of duplex mismatch or speed mismatch. could set the speed
and duplex every where same, like speed 100 and duplex full.
Thanks,
Beda
At 10:35 AM 8/13/2003 -0400, Charles T. Alexander wrote:
>I'm having a trunking problem
>
>R5
> |
>Cat1
> | fa/20
>Cat2
> | |
>R6 R7
>
>Vlan 57 and Vlan 67
>
>Can ping 5&7 but not 6&7
>
>Configs below.
>
>R5#r
>Building configuration...
>
>Current configuration : 998 bytes
>!
>version 12.2
>no service single-slot-reload-enable
>service timestamps debug uptime
>service timestamps log uptime
>no service password-encryption
>!
>hostname R5
>!
>logging buffered 10000 debugging
>logging rate-limit console 10 except errors
>!
>ip subnet-zero
>no ip finger
>no ip domain-lookup
>!
>no ip dhcp-client network-discovery
>!
>!
>!
>!
>interface Ethernet0
> ip address 150.50.57.5 255.255.255.0
>!
>interface Serial0
> no ip address
> shutdown
>!
>interface Serial1
> no ip address
> shutdown
>!
>interface BRI0
> no ip address
> shutdown
> isdn x25 static-tei 0
> cdapi buffers regular 0
> cdapi buffers raw 0
> cdapi buffers large 0
>!
>ip kerberos source-interface any
>ip classless
>ip http server
>!
>!
>alias exec i show ip route
>alias exec r show run
>alias exec c config t
>alias exec u undebug all
>alias exec b show ip bgp
>alias exec bs show ip bgp sum
>alias exec s show ip int brief
>!
>line con 0
> exec-timeout 0 0
> logging synchronous
> transport input none
> escape-character 27
>line aux 0
>line vty 0 4
> login
>!
>end
>
>R5#
>
>R6#r
>Building configuration...
>
>Current configuration : 785 bytes
>!
>version 12.2
>service timestamps debug uptime
>service timestamps log uptime
>no service password-encryption
>!
>hostname R6
>!
>logging buffered 10000 debugging
>!
>ip subnet-zero
>no ip domain-lookup
>!
>!
>!
>!
>interface Ethernet0
> ip address 150.50.67.6 255.255.255.0
>!
>interface Ethernet1
> no ip address
> shutdown
>!
>interface Serial0
> no ip address
> shutdown
>!
>interface Serial1
> no ip address
> shutdown
>!
>interface ATM0
> no ip address
> shutdown
> no atm ilmi-keepalive
>!
>ip classless
>no ip http server
>!
>!
>alias exec i show ip route
>alias exec r show run
>alias exec c config t
>alias exec u undebug all
>alias exec b show ip bgp
>alias exec bs show ip bgp sum
>alias exec s show ip int brief
>!
>line con 0
> exec-timeout 0 0
> logging synchronous
> escape-character 27
>line aux 0
>line vty 0 4
>!
>end
>
>R6#
>R7#r
>Building configuration...
>
>Current configuration : 966 bytes
>!
>version 12.2
>service timestamps debug uptime
>service timestamps log uptime
>no service password-encryption
>!
>hostname R7
>!
>logging buffered 10000 debugging
>!
>memory-size iomem 15
>ip subnet-zero
>!
>!
>no ip domain-lookup
>!
>ip audit notify log
>ip audit po max-events 100
>!
>call rsvp-sync
>!
>!
>!
>!
>!
>!
>!
>!
>interface Ethernet0/0
> no ip address
> half-duplex
>!
>interface Ethernet0/0.1
> encapsulation dot1Q 57
> ip address 150.50.57.7 255.255.255.0
>!
>interface Ethernet0/0.2
> encapsulation dot1Q 67
> ip address 150.50.67.7 255.255.255.0
>!
>interface Serial0/0
> no ip address
> shutdown
>!
>ip classless
>no ip http server
>!
>!
>!
>voice-port 1/0/0
>!
>voice-port 1/0/1
>!
>dial-peer cor custom
>!
>!
>!
>!
>alias exec i show ip route
>alias exec r show run
>alias exec c config t
>alias exec u undebug all
>alias exec b show ip bgp
>alias exec bs show ip bgp sum
>alias exec s show ip int brief
>!
>line con 0
> exec-timeout 0 0
> logging synchronous
> escape-character 27
>line aux 0
>line vty 0 4
>!
>end
>
>R7#
>
>Catalyst1#r
>Building configuration...
>
>Current configuration : 1926 bytes
>!
>version 12.1
>no service single-slot-reload-enable
>no service pad
>service timestamps debug uptime
>service timestamps log uptime
>no service password-encryption
>!
>hostname Catalyst1
>!
>logging buffered 10000 debugging
>!
>ip subnet-zero
>ip routing
>no ip domain-lookup
>!
>!
>spanning-tree extend system-id
>system mtu 1518
>!
>!
>!
>interface FastEthernet0/1
> no ip address
>!
>interface FastEthernet0/2
> no ip address
>!
>interface FastEthernet0/3
> no ip address
>!
>interface FastEthernet0/4
> no ip address
>!
>interface FastEthernet0/5
> switchport access vlan 57
> no ip address
>!
>interface FastEthernet0/6
> no ip address
>!
>interface FastEthernet0/7
> no ip address
>!
>interface FastEthernet0/8
> no ip address
>!
>interface FastEthernet0/9
> no ip address
>!
>interface FastEthernet0/10
> no ip address
>!
>interface FastEthernet0/11
> no ip address
>!
>interface FastEthernet0/12
> no ip address
>!
>interface FastEthernet0/13
> no ip address
>!
>interface FastEthernet0/14
> no ip address
>!
>interface FastEthernet0/15
> no ip address
>!
>interface FastEthernet0/16
> no ip address
>!
>interface FastEthernet0/17
> no ip address
>!
>interface FastEthernet0/18
> no ip address
>!
>interface FastEthernet0/19
> no ip address
>!
>interface FastEthernet0/20
> switchport trunk encapsulation dot1q
> switchport mode trunk
> no ip address
>!
>interface FastEthernet0/21
> no ip address
>!
>interface FastEthernet0/22
> no ip address
>!
>interface FastEthernet0/23
> no ip address
>!
>interface FastEthernet0/24
> no ip address
>!
>interface GigabitEthernet0/1
> no ip address
>!
>interface GigabitEthernet0/2
> no ip address
>!
>interface Vlan1
> no ip address
> shutdown
>!
>ip classless
>ip http server
>!
>!
>alias exec i show ip route
>alias exec r show run
>alias exec c config t
>alias exec u undebug all
>alias exec b show ip bgp
>alias exec bs show ip bgp sum
>alias exec s show ip int brief
>!
>line con 0
> exec-timeout 0 0
> logging synchronous
> escape-character 27
>line vty 0 4
> login
>line vty 5 15
> login
>!
>end
>
>Catalyst1#
>
>catalyst2#r
>Building configuration...
>
>Current configuration:
>!
>version 12.0
>no service pad
>service timestamps debug uptime
>service timestamps log uptime
>no service password-encryption
>!
>hostname catalyst2
>!
>logging buffered 10000 debugging
>!
>!
>!
>!
>!
>!
>ip subnet-zero
>no ip domain-lookup
>!
>!
>!
>interface FastEthernet0/1
>!
>interface FastEthernet0/2
>!
>interface FastEthernet0/3
>!
>interface FastEthernet0/4
>!
>interface FastEthernet0/5
>!
>interface FastEthernet0/6
> switchport access vlan 67
>!
>interface FastEthernet0/7
> switchport trunk encapsulation dot1q
> switchport mode trunk
>!
>interface FastEthernet0/8
>!
>interface FastEthernet0/9
>!
>interface FastEthernet0/10
>!
>interface FastEthernet0/11
>!
>interface FastEthernet0/12
>!
>interface FastEthernet0/13
>!
>interface FastEthernet0/14
>!
>interface FastEthernet0/15
>!
>interface FastEthernet0/16
>!
>interface FastEthernet0/17
>!
>interface FastEthernet0/18
>!
>interface FastEthernet0/19
>!
>interface FastEthernet0/20
> switchport trunk encapsulation dot1q
> switchport mode trunk
>!
>interface FastEthernet0/21
>!
>interface FastEthernet0/22
>!
>interface FastEthernet0/23
>!
>interface FastEthernet0/24
>!
>interface VLAN1
> no ip directed-broadcast
> no ip route-cache
>!
>alias exec i show ip route
>alias exec r show run
>alias exec c config t
>alias exec u undebug all
>alias exec b show ip bgp
>alias exec bs show ip bgp sum
>alias exec s show ip int brief
>!
>line con 0
> exec-timeout 0 0
> logging synchronous
> transport input none
> escape-character 27
> stopbits 1
>line vty 0 4
> login
>line vty 5 15
> login
>!
>end
>
>catalyst2#
>
>
>_______________________________________________________________________
>You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:58 GMT-3