From: MMoniz (ccie2002@tampabay.rr.com)
Date: Sat Aug 16 2003 - 19:16:29 GMT-3
I would think too. But this happens even after clear config, power cycle.
Then config again.
I don't get it. It almost seems like once you config an ISIS net system ID
the router has it for life.
I have erased my configs several times, reload , power cycle and still the
same.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Brown, Patrick (NSOC-OCF}
Sent: Saturday, August 16, 2003 5:24 PM
To: 'MMoniz '; 'ccielab@groupstudy.com '
Subject: RE: ISIS issue
MMoniz,
Do you have another NET configured on the router? If multiple NET's are
configured on the router, you must have the same system ID. This is not a
bug! Do a "no router clns" and a "no router isis".
HTH
Patrick B
-----Original Message-----
From: MMoniz
To: ccielab@groupstudy.com
Sent: 8/16/2003 3:14 PM
Subject: ISIS issue
Do you think this is a bug or what. After completely erasing my configs
and
power cycling my routers I start a new config.
When configuring ISIS it will not let me use any system ID other than
the
one I had configured prior. Even when configuring a different area than
was
before. My worry is if I do this in the lab and typo the system ID I
cannot
change it.
This happens on 12.1 and 12.2 code
R6(config)#ri 56.0009
R6(config-router)#net 56.0009.6666.0000.0000.66
%CLNS: System ID (6666.0000.0000.00) must not change when defining
additional area addresses
R6(config-router)#net 56.0009.6666.0000.0000.00
R6(config-router)#
Any ideas?
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:59 GMT-3