From: navaid@rogers.com
Date: Tue Sep 02 2003 - 14:38:27 GMT-3
What if we have following config ?
interface FastEthernet0/16
switchport access vlan 40
switchport trunk encapsulation dot1q
switchport trunk native vlan 102
switchport voice vlan 101
no ip address
spanning-tree portfast
end
>
> From: <navaid@rogers.com>
> Date: 2003/09/02 Tue PM 01:31:05 EDT
> To: <ccielab@groupstudy.com>
> Subject: native vlan and port config for IP phone.
>
> What is the correct method of configuring native vlan ?
> Fa0/15 is using "switchport access vlan" command.
> fa0/16 is using "switchport trunk native vlan" command.
>
> interface FastEthernet0/15
> switchport access vlan 102
> switchport trunk encapsulation dot1q
> switchport voice vlan 101
> no ip address
> spanning-tree portfast
> interface FastEthernet0/16
> switchport trunk encapsulation dot1q
> switchport trunk native vlan 102
> switchport voice vlan 101
> no ip address
> spanning-tree portfast
>
> Thanks,
>
> Navaid
>
>
1
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:21 GMT-3