From: Cristian Henry H (chenry@reuna.cl)
Date: Thu Sep 04 2003 - 11:55:24 GMT-3
try "show voice port | include Operation State", UP or DORMAT?,
try also with "vofr cisco" instead "vofr data 4"
Alec ha escrito:
>
> Hi group,
>
> Why I always got error in csim cmd when trying the below VoFR configuration
> ? Running csim start 2222 is okay, but 2222 directly leads to voice-port
> 3/0/0. Thanks.
>
> R14#csim start 1111
> csim: called number = 1111, loop count = 1 ping count = 0
>
> csim err csimDisconnected recvd DISC cid(12)
> csim: loop = 1, failed = 1
> csim: call attempted = 1, setup failed = 1, tone failed = 0
>
> hostname R14
> !
> logging rate-limit console 10 except errors
> !
> memory-size iomem 10
> ip subnet-zero
> !
> !
> no ip finger
> !
> ip audit notify log
> ip audit po max-events 100
> !
> !
> call rsvp-sync
> cns event-service server
> !
> !
> !
> !
> !
> !
> !
> !
> interface FastEthernet0/0
> no ip address
> shutdown
> duplex auto
> speed auto
> !
> interface Ethernet1/0
> no ip address
> shutdown
> half-duplex
> !
> interface Serial1/0
> no ip address
> encapsulation frame-relay
> frame-relay traffic-shaping
> frame-relay interface-dlci 300
> class toto
> vofr data 4
> !
> interface Serial1/1
> no ip address
> shutdown
> !
> interface ATM2/0
> no ip address
> shutdown
> no atm ilmi-keepalive
> !
> ip kerberos source-interface any
> ip classless
> no ip http server
> !
> !
> map-class frame-relay toto
> frame-relay cir 64000
> frame-relay mincir 32000
> no frame-relay adaptive-shaping
> frame-relay fair-queue
> frame-relay voice bandwidth 32000
> frame-relay fragment 100
> !
> !
> voice-port 3/0/0
> !
> voice-port 3/0/1
> !
> dial-peer cor custom
> !
> !
> !
> dial-peer voice 10 pots
> destination-pattern 2222
> port 3/0/0
> !
> dial-peer voice 20 vofr
> destination-pattern 1111
> session target Serial1/0 300
> !
>
> hostname R13
> !
> logging rate-limit console 10 except errors
> !
> memory-size iomem 10
> ip subnet-zero
> !
> !
> no ip finger
> !
> ip audit notify log
> ip audit po max-events 100
> !
> !
> call rsvp-sync
> cns event-service server
> !
> !
> !
> !
> !
> !
> !
> !
> interface FastEthernet0/0
> no ip address
> shutdown
> duplex auto
> speed auto
> !
> interface Ethernet1/0
> no ip address
> shutdown
> half-duplex
> !
> interface Serial1/0
> no ip address
> encapsulation frame-relay
> frame-relay traffic-shaping
> frame-relay interface-dlci 200
> class toto
> vofr data 4
> !
> interface Ethernet1/1
> no ip address
> shutdown
> half-duplex
> !
> interface Serial1/1
> no ip address
> shutdown
> !
> interface ATM2/0
> no ip address
> shutdown
> no atm ilmi-keepalive
> !
> ip kerberos source-interface any
> ip classless
> no ip http server
> !
> !
> map-class frame-relay toto
> frame-relay cir 64000
> frame-relay bc 300
> frame-relay mincir 32000
> no frame-relay adaptive-shaping
> frame-relay fair-queue
> frame-relay fragment 100
> !
> !
> voice-port 3/0/0
> !
> voice-port 3/0/1
> !
> dial-peer cor custom
> !
> !
> !
> dial-peer voice 10 pots
> destination-pattern 1111
> port 3/0/0
> !
> dial-peer voice 20 vofr
> destination-pattern 2222
> session target Serial1/0 200
> !
> !
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
-- Cristian E. Henry REUNAE-mail: chenry@reuna.cl Fono: 56-2-3370336
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:22 GMT-3