From: navaid@rogers.com
Date: Sat Sep 06 2003 - 17:32:37 GMT-3
Pl. ignore. It is resolved.
Thanks,
Navaid
>
> From: <navaid@rogers.com>
> Date: 2003/09/06 Sat PM 04:18:11 EDT
> To: <ccielab@groupstudy.com>
> Subject: Re: OSPF Adj. problem
>
> I have noticed a my s0 on R5 has md5 enabled. How do I disable it. I have tried reloading router. Enable and disable md5 authenticaiton. Clear ip ospf process...
>
> R5#sh ip ospf int
> Serial0 is up, line protocol is up
> Internet Address 136.10.100.5/27, Area 0
> Process ID 1, Router ID 136.10.5.5, Network Type POINT_TO_MULTIPOINT, Cost: 64
> ....<removed>
> ....
> Message digest authentication enabled
> No key configured, using default key id 0
> >
> > From: <navaid@rogers.com>
> > Date: 2003/09/06 Sat PM 04:12:15 EDT
> > To: <ccielab@groupstudy.com>
> > Subject: OSPF Adj. problem
> >
> > Frame relay was configured to use md5 authentication and all the commands are no removed and routers rebooted. I am having problem with ospf adjacency.
> >
> > Following is output of debug ip ospf packet.
> > 000266: *Feb 28 18:20:36.357: OSPF: Rcv pkt from 136.10.100.2, Serial0 : Mismatch Authentication type. Input packet specified type 0, we use type 2
> >
> > It is still trying to use authentication but I don't see it in my interface configurtion. follwoing is drawign and config.
> >
> > R5-s0-------s0.100---R2---S0.100--------s0-R6
> >
> > R2#sh run int s0.100
> > Building configuration...
> >
> > Current configuration : 469 bytes
> > !
> > interface Serial0.100 multipoint
> > ip address 136.10.100.2 255.255.255.224
> > ip pim sparse-dense-mode
> > ip ospf network point-to-multipoint non-broadcast
> > frame-relay de-group 1 105
> > frame-relay de-group 1 106
> > frame-relay map ip 136.10.100.2 105
> > frame-relay map ip 136.10.100.5 105 broadcast
> > frame-relay map ip 136.10.100.6 106 broadcast
> > frame-relay interface-dlci 105
> > class frts104
> > frame-relay interface-dlci 106
> > class frts106
> > no frame-relay inverse-arp
> > end
> >
> >
> > R5#sh run int s0
> > Building configuration...
> >
> > Current configuration : 414 bytes
> > !
> > interface Serial0
> > ip address 136.10.100.5 255.255.255.224
> > ip pim sparse-dense-mode
> > encapsulation frame-relay
> > ip ospf network point-to-multipoint non-broadcast
> > frame-relay map ip 136.10.100.2 501 broadcast
> > frame-relay map ip 136.10.100.5 501 broadcast
> > frame-relay map ip 136.10.100.6 501 broadcast
> > frame-relay interface-dlci 501
> > class frts501
> > no frame-relay inverse-arp
> > frame-relay lmi-type ansi
> > end
> >
> > Navaid
> >
> >
> > 1
> >
> >
> > _______________________________________________________________________
> > You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
>
> 1
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
1
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:24 GMT-3