From: navaid@rogers.com
Date: Tue Sep 16 2003 - 14:42:36 GMT-3
I am redistributing ospf E2 routes in rip v1. I have no auto-summary enabled in rip but next hop rip v1 router receive a classful summary route (should summarized as per mask which is 24 bit).
ospf----R2------rip-------R4
R2 redistributing ospf to rip.
ospf routes are :
10.1.1.1
10.2.2.2
| | | |
10.9.9.9
R4 receive summary that is 10.0.0.0
Mask on R2 interface pointing to R4 is 24 bit.
All ospf routes are Type E2.
---------R2----------------
router rip
version 1
redistribute ospf 1 metric 2 match internal external 1 external 2 route-map ospf2rip
passive-interface default
no passive-interface Serial0.1
network 172.31.0.0
no auto-summary
!
router ospf 1
log-adjacency-changes
area 0 authentication message-digest
area 12 virtual-link 10.1.1.1 authentication message-digest
area 12 virtual-link 10.1.1.1 message-digest-key 1 md5 7 00071A150754
redistribute connected subnets route-map conn2ospf
redistribute rip subnets route-map rip2ospf
network 172.31.12.0 0.0.0.255 area 12
network 172.31.25.0 0.0.0.255 area 0
network 172.31.100.0 0.0.0.7 area 0
neighbor 172.31.100.6 priority 1
neighbor 172.31.100.5 priority 1
!
--------R4--------------------
!
router rip
version 1
passive-interface default
no passive-interface Serial0/0
network 10.0.0.0
network 172.31.0.0
no auto-summary
!
1
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:28 GMT-3