From: Jay Greenberg (groupstudylist@execulink.com)
Date: Thu Sep 18 2003 - 05:25:46 GMT-3
At least one end needs a neighbor statement on NBMA
--
Jay Greenberg, CCIE #11021
--------------------------
www.free-labs.com
-Free Cisco Rack Rental-
--------------------------
On Thu, 2003-09-18 at 00:42, Kaiser Anwar wrote:
> Hi,
> I have a simple about ospf NBMA multipoint interface. I have R1 connected
> to R3 with Frame relay map statements.
> I dont want to use ip ospf network staement. This is how i am doing, I dont
> know what i am missing.
> All I have on router 1 is network statement and on interface i have ip ospf
> priority 0 so it does not become BDR.
> R3 has nei statement for R1. This is what I get when using the show
> command. Thanks
>
>
>
> r3#o nei
>
> Neighbor ID Pri State Dead Time Address Interface
> N/A 0 ATTEMPT/DROTHER - 130.10.10.1 Serial0/0.1
>
> ***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:30 GMT-3