From: Barney Gaumer (bagaumer@yahoo.com)
Date: Thu Sep 18 2003 - 15:55:48 GMT-3
True
--- MADMAN <dmadlan@qwest.com> wrote:
> Barney Gaumer wrote:
>
> > I was able to bypass the "map" statement on a maj.
> > int.
>
> And you can thank inverse arp. you'll notice you
> have no frame map,
> (sh frame map) and that the DLCI was learned
> dynamically.
>
> Dave
> >
> > IOS: Enterprise 12.2.1d on a 2500.
> >
> > interface Serial1
> > ip address 1.1.1.1 255.0.0.0
> > encapsulation frame-relay
> > shutdown
> > frame-relay interface-dlci 16
> >
> > B
> >
> > --- Ken.Farrington@barclayscapital.com wrote:
> >
> >>Please could you guys help me on this and confirm
> >>what I am saying is 100%
> >>correct?
> >>
> >>Major Interface (multipoint by nature)
> >>Only frame-relay map or Inverse ARP - Can enter
> >>interface-dlci but it will
> >>not work.
> >>
> >>point-to-point Sub Interface
> >>frame-relay interface-dlci ONLY
> >>
> >>multipoint Sub Interface
> >>Only frame-relay map or Inverse ARP (cant use
> >>interface-dlci *see below*)
> >>
> >>R2(config)#int s0/0.1 multipoint
> >>R2(config-subif)#frame map ip 10.10.10.4 104 bro
> >>FRAME-RELAY INTERFACE-DLCI command should be used
> on
> >>point-to-point
> >>interfaces
> >>R2(config-subif)#frame-relay interface-dlci 104
> >>R2(config-fr-dlci)#^Z
> >>R2#
> >>
> >>MY POINT ......
> >>
> >>So if I have a point-to-point PVC between two
> >>routers, one is a
> >>point-to-point sub int and the other end is a
> Major
> >>interface. I HAVE TO USE
> >>"-frame interface-dlci" on the point-to-point sub
> >>int and frame-relay map ip
> >>on the otherside of the PVC which is a major
> >>interface.
> >>
> >>(p-2-p sub-int) (major-int)
> >>rtr2-------------------------------rtr4
> >>
> >>Please could someone confirm this and let me know
> if
> >>there is any good
> >>documentation to clear this up.
> >>
> >>Many thx
> >>
> >>
> >>
> >
> >
>
------------------------------------------------------------------------
> >
> >>For more information about Barclays Capital,
> please
> >>visit our web site at http://www.barcap.com.
> >>
> >>
> >>Internet communications are not secure and
> therefore
> >>the Barclays
> >>Group does not accept legal responsibility for the
> >>contents of this
> >>message. Although the Barclays Group operates
> >>anti-virus programmes,
> >>it does not accept responsibility for any damage
> >>whatsoever that is
> >>caused by viruses being passed. Any views or
> >>opinions presented are
> >>solely those of the author and do not necessarily
> >>represent those of the
> >>Barclays Group. Replies to this email may be
> >>monitored by the Barclays
> >>Group for operational or business reasons.
> >>
> >>
> >
> >
>
------------------------------------------------------------------------
> >
> >>***Get your CCIE and a FREE vacation:
> >>Shop.GroupStudy.com***
> >>
> >
> >
>
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:30 GMT-3