From: Paul Chen (cpjchen@starhub.net.sg)
Date: Thu Sep 18 2003 - 23:04:18 GMT-3
Hi Raj,
Thanks for the mail- the combination of symbols like .+ , .% confuses me.
Does this mean that 408555+ will call to 408555,4085555,4085555 ?
If I have the following configs and if I dial 408555 on r3 , r1 will ring
R1
Dial-peer voice 1 pots
Destination-pattern 408555
if destination-pattern is 4085555 dialing 408555 on r3 will get a busy tone
if destination-pattern is 40855555 dialing 408555 on r3 will also get a
busy tone
R3
Dial-peer voice 1 voip
Destination-pattern 408555+
Session target ipv4:R1
..
The CCO documents say + means the preceding digit occurred one or more time,
if I understand this correctly , preceding means come before
408555+ means before the + 5 occurred one or more times, does this mean if
I have a dial-peer pots destination pattern of 4085 it will ring.
I tested it , it will not ring if I stop dialing at 4085 but if I dial
408555 then it will ring.
What about 555(43)+
If the destination pattern is 5554343 it will not work only 55543 will work
Thanks,
Paul
-----Original Message-----
From: raj_tpd@comcast.net [mailto:raj_tpd@comcast.net]
Sent: Thursday, September 18, 2003 4:47 PM
To: Paul Chen
Subject: RE: Destination-pattern- Calling all VOIP Experts
Forgot the #1 question
408555+ this means 408555 followed by 5 repeated one or more times ?
what that means is that
40855 followed by 5 repeat atleast one time or more.
Raj
> Please help me to clarify 2 questions below:
>
> Thanks,
> Paul
>
> -----Original Message-----
> From: raj_tpd@comcast.net [mailto:raj_tpd@comcast.net]
> Sent: Thursday, September 18, 2003 4:11 PM
> To: Paul Chen
> Subject: RE: Destination-pattern- Calling all VOIP Experts
>
> I think I have found your problem. I think you made a mistake configuring
> the
> destination-pattern before and then corrected it.
>
> 408555+ this means 408555 followed by 5 repeated one or more times ?
>
>
> When you do the r3#sh dialplan number 4085551212
> under that you still see the destination-pattern as
> "tag = 301, destination-pattern = `408555+'," which says match this 408555
> sequence one or more times.
>
> ---------------------------------------------------------------------
>
> 408555.+ THIS MEANS 4085556 OR 7 DIGITS ONLY ? I TRIED THIS AND IT WORKS
> BUT WHEN I
>
> TRIED 40855566 - 8 DIGITS IT DOES NOT WORK.
>
> SO WHAT IS THE MEANING OF REPEAT THAT PATTERN ONE OR MORE TIME - WHAT
> PATTERN ?
>
> But when you have 408555.+ it states that match any digit and then repeat
> that
> pattern one or more time.
>
> I think you should clear the voice config or restart the router.
>
> Let me know if this don't work.
>
> Raj
> > Hi Raj,
> >
> > Thanks, I will try it and let you know. In the meantime, I have another
> > problem:
> >
> >
> > On R3 - 408555.+ calls 4085551212 but when I dial up to 408555 , the 6
> > digit, I get a busy tone ?
> >
> > Same problem with 408555+ or 408555.%
> >
> >
> >
> > r1
> >
> >
> > dial-peer voice 101 pots
> > destination-pattern 4085551212
> > port 1/0/1
> >
> >
> > r3
> >
> >
> > dial-peer voice 300 pots
> > destination-pattern 7038103333
> > port 1/0/0
> > !
> > dial-peer voice 301 voip
> > destination-pattern 408555.+
> > session target ipv4:172.16.13.1
> >
> > !
> >
> > OR
> >
> >
> > dial-peer voice 301 voip
> > destination-pattern 408555.%
> > session target ipv4:172.16.13.1
> >
> >
> >
> > sh dial plan looks okay on r3: but after the 6 digit a busy tone ?
> >
> >
> > r3#sh dialplan number 4085551212
> > >Macro Exp.: 4085551212
> > >
> > >VoiceOverIpPeer301
> > > peer type = voice, information type = voice,
> > > description = `',
> > > tag = 301, destination-pattern = `408555+',
> > > answer-address = `', preference=0,
> > > CLID Restriction = None
> > > CLID Network Number = `'
> > > CLID Second Number sent
> > > source carrier-id = `', target carrier-id = `',
> > > source trunk-group-label = `', target trunk-group-label = `',
> > > numbering Type = `unknown'
> > > group = 301, Admin state is up, Operation state is up,
> > > incoming called-number = `', connections/maximum =
0/unlimited,
> > > DTMF Relay = disabled,
> > > modem transport = system,
> > > huntstop = disabled,
> > > in bound application associated: 'DEFAULT'
> > > out bound application associated: ''
> > > dnis-map =
> > > permission :both
> > > incoming COR list:maximum capability
> > > outgoing COR list:minimum requirement
> > > Translation profile (Incoming):
> > > Translation profile (Outgoing):
> > > incoming call blocking:
> > > translation-profile = `'
> > > disconnect-cause = `no-service'
> > > type = voip, session-target = `ipv4:172.16.13.1',
> > > technology prefix:
> > > settle-call = disabled
> > > ip media DSCP = ef, ip signaling DSCP = af31, UDP checksum =
> > >disabled,
> > > session-protocol = cisco, session-transport = system, req-qos
> > >= best-eff ort,
> > > acc-qos = best-effort,
> > > RTP dynamic payload type values: NTE = 101
> > > Cisco: NSE=100, fax=96, fax-ack=97, dtmf=121, fax-relay=122
> > > CAS=123, ClearChan=125, PCM switch over u-law=0,A-law=8
> > > RTP comfort noise payload type = 19
> > > fax rate = voice, payload size = 20 bytes
> > > fax protocol = system
> > > fax-relay ecm enable
> > > fax NSF = 0xAD0051 (default)
> > > codec = g729r8, payload size = 20 bytes,
> > > Expect factor = 0, Icpif = 20,
> > > Playout Mode is set to adaptive,
> > > Initial 60 ms, Max 300 ms
> > > Playout-delay Minimum mode is set to default, value 40 ms
> > > Fax nominal 300 ms
> > > Max Redirects = 1, signaling-type = cas,
> > > VAD = enabled, Poor QOV Trap = disabled,
> > > Source Interface = NONE
> > > voice class sip url = system,
> > > voice class sip rel1xx = system,
> > > voice class perm tag = `'
> > > Time elapsed since last clearing of voice call statistics
never
> > > Connect Time = 0, Charged Units = 0,
> > > Successful Calls = 8, Failed Calls = 54, Incomplete Calls = 0
> > > Accepted Calls = 1, Refused Calls = 0,
> > > Last Disconnect Cause is "1 ",
> > > Last Disconnect Text is "unassigned number (1)",
> > > Last Setup Time = 1153299.
> > >Matched: 4085551212 Digits: 6 -------------------------------------
> > >Target: ipv4:172.16.13.1
> >
> >
> >
> > DEBUG DIAL PEERS
> >
> >
> > r1#
> > >*Mar 1 01:42:15.918: Inside dpMatchCore:
> > >*Mar 1 01:42:15.918: destination pattn: 408555 expanded string:
> > >408555 *Mar 1 01:42:15.918: Inside dpMatchCore: *Mar 1 01:42:15.918:
> > >destination pattn: expanded string: *Mar 1 01:42:15.918: Inside
> > >dpMatchCore: *Mar 1 01:42:15.918: destination pattn: expanded
> > >string: *Mar 1 01:42:15.918: dpAssociateIncomingPeer_T null source
> > >route label *Mar 1 01:42:15.922: Inside dpMatchCore:
> > >*Mar 1 01:42:15.922: destination pattn: 408555 expanded string:
408555
> > >*Mar 1 01:42:15.922: Inside dpMatchCore:
> > >*Mar 1 01:42:15.922: destination pattn: expanded string:
> > >*Mar 1 01:42:15.922: Inside dpMatchCore:
> > >*Mar 1 01:42:15.922: destination pattn: expanded string:
> > >*Mar 1 01:42:15.926: dpAssociateIncomingPeer_T null source route
label
> > >*Mar 1 01:42:15.926: Inside dpMatchCore:
> > >*Mar 1 01:42:15.926: destination pattn: 408555 expanded string:
408555
> > >*Mar 1 01:42:15.926: Inside dpMatchCore:
> > >*Mar 1 01:42:15.926: destination pattn: expanded string:
> > >*Mar 1 01:42:15.926: Inside dpMatchCore:
> > >*Mar 1 01:42:15.926: destination pattn: expanded string:
> > >*Mar 1 01:42:15.926: dpAssociateIncomingPeer_T null source route
label
> > >*Mar 1 01:42:15.930: Inside dpMatchPeersMoreArg
> > >*Mar 1 01:42:15.930: dpMatchPeersMoreArg: Match Dest. pattern; called
> > >(408555)
> > >*Mar 1 01:42:15.930: Inside dpMatchCore:
> > >*Mar 1 01:42:15.934: destination pattn: 408555 expanded string:
408555
> > >*Mar 1 01:42:15.934: dpMatchPeersMoreArg: Result=-1 after
> MATCH_ORIGINATE
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> > R3 --------------
> >
> >
> >
> > >r3#
> > >*Mar 1 03:14:50.728: Inside dpMatchCore:
> > >*Mar 1 03:14:50.728: destination pattn: expanded string: *Mar 1
> > >03:14:50.728: Inside dpMatchCore: *Mar 1 03:14:50.728: destination
> > >pattn: expanded string: *Mar 1 03:14:50.728: Inside dpMatchCore:
> > >*Mar 1 03:14:50.728: destination pattn: expanded string:
> > >r3#
> > >*Mar 1 03:14:54.951: Inside dpMatchPeersMoreArg
> > >*Mar 1 03:14:54.951: dpMatchPeersMoreArg: Match Dest. pattern; called
> (4)
> > >*Mar 1 03:14:54.951: Inside dpMatchCore:
> > >*Mar 1 03:14:54.951: destination pattn: 4 expanded string: 4
> > >*Mar 1 03:14:54.951: MatchNextPeer: Peer 301 matched partially
> > >*Mar 1 03:14:54.951: dpMatchPeersMoreArg: Result=1 after
MATCH_ORIGINATE
> > >*Mar 1 03:14:55.532: Inside dpMatchPeersMoreArg
> > >*Mar 1 03:14:55.532: dpMatchPeersMoreArg: Match Dest. pattern; called
> (40)
> > >*Mar 1 03:14:55.532: Inside dpMatchCore:
> > >*Mar 1 03:14:55.532: destination pattn: 40 expanded string: 40
> > >*Mar 1 03:14:55.532: MatchNextPeer: Peer 301 matched partially
> > >*Mar 1 03:14:55.532: dpMatchPeersMoreArg: Result=1 after
MATCH_ORIGINATE
> > >*Mar 1 03:14:56.229: Inside dpMatchPeersMoreArg
> > >*Mar 1 03:14:56.233: dpMatchPeersMoreArg: Match Dest. pattern; called
> > (408)
> > >*Mar 1 03:14:56.233: Inside dpMatchCore:
> > >*Mar 1 03:14:56.233: destination pattn: 408 expanded string: 408
> > >*Mar 1 03:14:56.233: MatchNextPeer: Peer 301 matched partially
> > >*Mar 1 03:14:56.233: dpMatchPeersMoreArg: Result=1 after
MATCH_ORIGINATE
> > >*Mar 1 03:14:56.629: Inside dpMatchPeersMoreArg
> > >*Mar 1 03:14:56.629: dpMatchPeersMoreArg: Match Dest. pattern; called
> > >(4085)
> > >*Mar 1 03:14:56.629: Inside dpMatchCore:
> > >*Mar 1 03:14:56.633: destination pattn: 4085 expanded string: 4085
> > >*Mar 1 03:14:56.633: MatchNextPeer: Peer 301 matched partially
> > >*Mar 1 03:14:56.633: dpMatchPeersMoreArg: Result=1 after
MATCH_ORIGINATE
> > >*Mar 1 03:14:57.002: Inside dpMatchPeersMoreArg
> > >*Mar 1 03:14:57.002: dpMatchPeersMoreArg: Match Dest. pattern; called
> > >(40855)
> > >*Mar 1 03:14:57.002: Inside dpMatchCore:
> > >*Mar 1 03:14:57.002: destination pattn: 40855 expanded string: 40855
> > >*Mar 1 03:14:57.002: MatchNextPeer: Peer 301 matched partially
> > >*Mar 1 03:14:57.002: dpMatchPeersMoreArg: Result=1 after
MATCH_ORIGINATE
> > >*Mar 1 03:14:57.431: Inside dpMatchPeersMoreArg
> > >*Mar 1 03:14:57.431: dpMatchPeersMoreArg: Match Dest. pattern; called
> > >(408555)
> > >*Mar 1 03:14:57.431: Inside dpMatchCore:
> > >*Mar 1 03:14:57.431: destination pattn: 408555 expanded string:
408555
> > >*Mar 1 03:14:57.431: MatchNextPeer: Peer 301 matched
> > >*Mar 1 03:14:57.431: dpMatchPeersMoreArg: Result=0 after
MATCH_ORIGINATE
> > >
> > >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> > raj_tpd@comcast.net
> > Sent: Thursday, September 18, 2003 11:54 AM
> > To: Paul Chen
> > Cc: ccielab@groupstudy.com
> > Subject: Re: Destination-pattern- Calling all VOIP Experts
> >
> > I think this will be more specific.
> >
> > Try this, I have not tested this so I am not sure if this will work or
> not.
> > But
> > just trying to help
> >
> > dial-peer voice 100 voip
> >
> > destination-pattern 55574[13][24][35][46][57]
> > session target ipv4:135.15.13.1
> >
> >
> > Let me know if this works, and if this don't work you can always go with
> >
> > destination-pattern 55574.....
> >
> > Raj
> > > Hi Everyone,
> > >
> > >
> > >
> > > Can anyone figure out how to do this ? Any help appreciated.
> > >
> > >
> > >
> > > R1
> > >
> > >
> > >
> > > dial-peer voice 100 pots
> > >
> > > destination-pattern 5557412345
> > >
> > > port 1/0/0
> > >
> > > !
> > >
> > > dial-peer voice 101 pots
> > >
> > > destination-pattern 5557434567
> > >
> > > port 1/0/1
> > >
> > > !
> > >
> > > dial-peer voice 300 voip
> > >
> > > destination-pattern 7038103333
> > >
> > > session target ipv4:135.15.13.3
> > >
> > >
> > >
> > >
> > >
> > > -Question ------------R3- call any R1's phones with only one voip
> > > dial-peer.
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > dial-peer voice 300 pots
> > >
> > > destination-pattern 7038103333
> > >
> > > port 1/0/0
> > >
> > > !
> > >
> > > dial-peer voice 100 voip
> > >
> > > destination-pattern 55574[(12345),(34567)]$ ----------- This
Does
> > NOT
> > > work ? I tested it. Busy tone after dialing 55574
> > >
> > > session target ipv4:135.15.13.1
> > >
> > > ***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
> > >
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:31 GMT-3