minor issue: IS-IS display

From: Pierre-Alex (pierreg@planetkc.com)
Date: Wed Sep 24 2003 - 13:10:36 GMT-3

Next message: MADMAN: "Re: Eigrp on Frame-relay point-to-point"
Previous message: Ken.Farrington@barclayscapital.com: "RE: Eigrp on Frame-relay point-to-point"
Next in thread: navaid@rogers.com: "Re: minor issue: IS-IS display"
Maybe reply: navaid@rogers.com: "Re: minor issue: IS-IS display"
Maybe reply: Glenn: "RE: minor issue: IS-IS display"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Is there a way to setup routers so that I can see the system id of the
routers instead of the hostnames?

Can't find an IOS command for this.... (see output below)

thanks,

Pierre-Alex

R5> sh isis dat

IS-IS Level-1 Link State Database:
LSPID LSP Seq Num LSP Checksum LSP Holdtime ATT/P/OL
R1.00-00 0x00000476 0x6F79 192 1/0/0
R1.05-00 0x00000474 0xAEED 157 0/0/0
R5.00-00 * 0x000000E7 0xB84B 1038 0/0/0
R2.00-00 0x000000E6 0x4837 992 0/0/0
R2.01-00 0x000000E6 0x7D6A 861 0/0/0

R5>sh clns nei

System Id Interface SNPA State Holdtime Type
Protocol
R2 To0 0007.78bc.dbe9 Up 9 L1 IS-IS
R1 Se1 *HDLC* Up 24 L1 IS-IS
R5>

***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***

Next message: MADMAN: "Re: Eigrp on Frame-relay point-to-point"
Previous message: Ken.Farrington@barclayscapital.com: "RE: Eigrp on Frame-relay point-to-point"
Next in thread: navaid@rogers.com: "Re: minor issue: IS-IS display"
Maybe reply: navaid@rogers.com: "Re: minor issue: IS-IS display"
Maybe reply: Glenn: "RE: minor issue: IS-IS display"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:35 GMT-3