From: Peng Zheng (zpnist@yahoo.com)
Date: Sat Sep 27 2003 - 16:20:08 GMT-3
Maybe it's because some mixed action:
I use legacy first, then remove changed to dialer
profile, after some successful call, I can not remove
the dialer interface.
--- Scott Morris <swm@emanon.com> wrote:
> Do a 'show dialer' and see if anything is being
> used... Mine was
> removed without even taking stuff out.
>
> interface Dialer1
> ip unnumbered Loopback0
> encapsulation ppp
> dialer pool 1
> dialer idle-timeout 86400
> peer default ip address pool dialin
> no fair-queue
> ppp authentication chap callin
> ppp multilink
> !
>
> 3620-ISDN#conf t
> Enter configuration commands, one per line. End
> with CNTL/Z.
> 3620-ISDN(config)#no int dialer 1
> 3620-ISDN(config)#
> Di1 DDR: dialer shutdown complete
> 18w2d: %LINK-5-CHANGED: Interface Dialer1, changed
> state to
> administratively down
> 3620-ISDN(config)#^Z
>
> *shrug*
>
> You could also shut the interfaces (ISDN) down, just
> to be sure
> something isn't somehow stuck in the database.
> Short of that, reloading
> is the only other way to really clear all of that
> out if something
> really is stuck in that fashion. (IOS bug?)
>
>
> Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service
> Provider) #4713,
> CISSP, JNCIS, et al. IPExpert CCIE Program Manager
> IPExpert Sr.
> Technical Instructor
> swm@emanon.com/smorris@ipexpert.net
> http://www.ipexpert.net
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf Of
> Peng Zheng
> Sent: Saturday, September 27, 2003 12:42 PM
> To: Thomas Larus
> Cc: ccielab@groupstudy.com
> Subject: Re: can not remove dialer interface
>
>
> I already remove dialer pool-member 1 from physical
> ISDN interface, but I can not remove dialer pool 1
> from dialer profile.
>
>
> --- Thomas Larus <tlarus@cox.net> wrote:
> > I am not sure, but try removing the "dialer pool
> 1"
> > from under the dialer
> > profile, and if that does not work, remove any
> > dialer pool-related stuff
> > from the physical ISDN interface, like the
> statement
> > that puts the physical
> > interface in a dialer pool.
> >
> >
> > ----- Original Message -----
> > From: "Peng Zheng" <zpnist@yahoo.com>
> > To: <ccielab@groupstudy.com>
> > Sent: Saturday, September 27, 2003 12:58 AM
> > Subject: can not remove dialer interface
> >
> >
> > > When I tried to remove dialer interface, I got:
> > >
> > > %Remove dialing ddb from profile first
> > >
> > > the only config in dialer interface is:
> > >
> > > interface Dialer1
> > > no ip address
> > > dialer pool 1
> > >
> > > what's the problem?
> > >
> > >
> > >
> > > __________________________________
> > > Do you Yahoo!?
> > > The New Yahoo! Shopping - with improved product
> > search
> > > http://shopping.yahoo.com
> > >
> > > ***Get your CCIE and a FREE vacation:
> > Shop.GroupStudy.com***
> > >
> >
>
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:38 GMT-3