From: Kaiser Anwar (kaiseranwar@sbcglobal.net)
Date: Sat Sep 27 2003 - 18:49:32 GMT-3
HI again,
I have this command on r2 serial interface.
random-detect precedence rsvp 55 65 1
but it does not show at all. It takes the command but when i do sh run it
does not show. Than
r2#sh queueing random-detect
20:44:20: %SYS-5-CONFIG_I: Configured from console by console
Current random-detect configuration:
Serial0
Queueing strategy: random early detection (WRED)
Exp-weight-constant: 16 (1/65536)
Mean queue depth: 0
class Random drop Tail drop Minimum Maximum Mark
pkts/bytes pkts/bytes thresh thresh prob
0 0/0 0/0 20 40 1/10
1 0/0 0/0 22 40 1/10
2 0/0 0/0 24 40 1/10
3 0/0 0/0 26 40 1/10
4 0/0 0/0 28 40 1/10
5 0/0 0/0 31 40 1/10
6 0/0 0/0 33 40 1/10
7 0/0 0/0 35 40 1/10
rsvp 0/0 0/0 37 40 1/10
----- Original Message -----
From: "Kaiser Anwar" <kaiseranwar@sbcglobal.net>
To: "Group Study" <ccielab@groupstudy.com>
Sent: Saturday, September 27, 2003 4:23 PM
Subject: Re: IOS 12.2 on 2500 and wred
> Sorry this config is ok it was rsvp that I can not change. Thanks
>
>
>
> ----- Original Message -----
> From: "Kaiser Anwar" <kaiseranwar@sbcglobal.net>
> To: "Group Study" <ccielab@groupstudy.com>
> Sent: Saturday, September 27, 2003 4:15 PM
> Subject: IOS 12.2 on 2500 and wred
>
>
> > Hi,
> > I hope some one can help me. I am trying to enable wred on serial
> interface
> > on 2500 series router running 12.2. But i can seem to change any
> parameters..
> > Plaese help. Thanks
> >
> >
> > This is what i have on serial interface.
> >
> > random-detect
> > random-detect precedence 5 40 80 1 This is not showing? ( Trying to
> change
> > precedence )
> > random-detect flow
> >
> > r2#sh queueing random-detect interface ser 0
> > Current random-detect configuration:
> > Serial0
> > Queueing strategy: random early detection (WRED)
> > Exp-weight-constant: 9 (1/512)
> > Mean queue depth: 0
> > Max flow count: 256 Average depth factor: 4
> > Flows (active/max active/max): 0/0/256
> >
> > class Random drop Tail drop Minimum Maximum Mark
> > pkts/bytes pkts/bytes thresh thresh prob
> > 0 0/0 0/0 20 40 1/10
> > 1 0/0 0/0 22 40 1/10
> > 2 0/0 0/0 24 40 1/10
> > 3 0/0 0/0 26 40 1/10
> > 4 0/0 0/0 28 40 1/10
> > 5 0/0 0/0 40 80 1/1 this
should
> > reflect the change according to my understaning.
> > 6 0/0 0/0 33 40 1/10
> > 7 0/0 0/0 35 40 1/10
> > rsvp 0/0 0/0 37 40 1/10
> >
> > ***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
> > _______________________________________________________________________
> > Please help support GroupStudy by purchasing your study materials from:
> > shop.groupstudy.com
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> ***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:38 GMT-3