From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Tue Sep 30 2003 - 23:26:33 GMT-3
John,
You want 'exec-timeout'.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 708-362-1418 (Outside the US and Canada)
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> John Tafasi
> Sent: Tuesday, September 30, 2003 9:18 PM
> To: ccielab
> Subject: session-timeout command
>
> Hi group,
>
> I am connected to r2 console port. I configured the console line with
the
> "
> session-timeout 1" command. It is now more than two minutes the
nothing
> happens. I have included the necessary show commands below. What is
the
> reason that the session is not timing out?
>
> Thanks
>
> John Tafasi
>
>
> r2#sho termin
> Line 0, Location: "", Type: ""
> Length: 24 lines, Width: 80 columns
> Status: PSI Enabled, Ready, Active, Automore On
> Capabilities: none
> Modem state: Ready
> Group codes: 0
> Special Chars: Escape Hold Stop Start Disconnect Activation
> ^^x none - - none
> Timeouts: Idle EXEC Idle Session Modem Answer Session
> Dispatch
> 00:10:00 00:01:00 none
not
> set
> Idle Session Disconnect Warning
> never
> Login-sequence User Response
> 00:00:30
> Autoselect Initial Wait
> not set
> Modem type is unknown.
> Session limit is not set.
> Time since activation: 00:24:35
> Editing is enabled.
> History is enabled, history size is 20.
> DNS resolution in show commands is enabled
> Full user help is disabled
> Allowed transports are lat pad v120 mop telnet rlogin nasi. Preferred
is
> lat.
> No output characters are padded
> No special data dispatching characters
> r2#
>
> ***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
>
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:40 GMT-3