From: Murali Rao (muralig19@yahoo.com)
Date: Tue Nov 25 2003 - 16:46:08 GMT-3
Guys,
Can some one guide me to get dot1q trunk between a cat4507
and nortel baystack 450T to work?
I have configured 2 vlans(untagged members) on nortel box
and getting a 4507 to route between these 2 vlans. The
802.1q trunk is shown as up and trunking on cisco switch
but am not able to get the routing between these two vlans
in place.
Cisco config:
interface FastEthernet3/27
description link to switch f07
switchport trunk encapsulation dot1q
switchport mode trunk
load-interval 30
interface Vlan1
ip address 172.16.100.1 255.255.255.0
!
interface Vlan20
ip address 172.16.20.10 255.255.255.0
!
interface Vlan21
ip address 172.16.21.10 255.255.255.0
-----------------------------------------------
L3#sh int fa3/27 trunk
Port Mode Encapsulation Status Native
vlan
Fa3/27 on 802.1q trunking 1
Port Vlans allowed on trunk
Fa3/27 1-4094
Port Vlans allowed and active in management domain
Fa3/27 1,20-21,1002-1005
Port Vlans in spanning tree forwarding state and not
pruned
Fa3/27 1,20-21,1002-1005
-----------------------------------------------------
Any help is highly appreciated.
Thanks
Murali
__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:17 GMT-3