From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Tue Nov 25 2003 - 19:23:30 GMT-3
Later T trains sometimes lack all the context sensitive help.
R1#sh ver | in IOS
IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.2(15)T5, RELEASE
SOFTWARE (fc1)
R1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R1(config)#dialer-list 1 protocol ?
bridge Bridging
clns OSI Connectionless Network Service
decnet DECnet
ip IP
ipv6 IPv6
ipx Novell IPX
llc2 LLC2
netbios NETBIOS
R1(config)#dialer-list 1 protocol clns_is permit
R6#sh ver | in IOS
IOS (tm) 7200 Software (C7200-IK9O3S-M), Version 12.2(11)T9, RELEASE
SOFTWARE (fc1)
R6#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R6(config)#dialer-list 1 protocol ?
appletalk AppleTalk
bridge Bridging
clns OSI Connectionless Network Service
decnet DECnet
hpr HPR
ip IP
ipv6 IPv6
ipx Novell IPX
llc2 LLC2
netbios NETBIOS
vines Banyan Vines
xns XNS
R6(config)#dialer-list 1 protocol clns_is permit
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 708-362-1418 (Outside the US and Canada)
> -----Original Message-----
> From: Jonathan V Hays [mailto:jhays@jtan.com]
> Sent: Tuesday, November 25, 2003 4:14 PM
> To: 'Brian McGahan'
> Subject: RE: {SPAM?} RE: IS-IS on ISDN NOT LEGACY !!!
>
> Brian,
>
> What do you mean by 'Later releases' ?
>
> R1#sh ver | include IOS
> IOS (tm) 3600 Software (C3640-JK9O3S-M), Version 12.2(17), RELEASE
> SOFTWARE (fc3)
> R1#conf t
> Enter configuration commands, one per line. End with CNTL/Z.
> R1(config)#dialer-list 1 protocol ?
> appletalk AppleTalk
> bridge Bridging
> clns OSI Connectionless Network Service
> clns_es CLNS End System
> clns_is CLNS Intermediate System <=#=#=#=#=#=#=#=#
> decnet DECnet
> decnet_node DECnet node
> decnet_router-L1 DECnet router L1
> decnet_router-L2 DECnet router L2
> hpr HPR
> ip IP
> ipx Novell IPX
> llc2 LLC2
> netbios NETBIOS
> vines Banyan Vines
> xns XNS
>
> R1(config)#dialer-list 1 protocol
>
> Jonathan
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Brian McGahan
> Sent: Tuesday, November 25, 2003 4:42 PM
> To: 'Pierre-Alex'; ccielab@groupstudy.com
> Subject: {SPAM?} RE: IS-IS on ISDN NOT LEGACY !!!
>
>
> Pierre,
>
> Yes, all you need is the 'ip router isis' command on the dialer
> interface. Note that IS-IS as defined by interesting traffic is
> 'protocol
> clns_is' Later releases do not list it in the help but it is there.
> Most
> likely they removed it from the help because they're going to cover it
> on
> the CCIE lab in the near future ;)
>
> Post your configs if you're still having trouble.
>
> HTH,
>
> Brian McGahan, CCIE #8593
> bmcgahan@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987
> Direct: 708-362-1418 (Outside the US and Canada)
>
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of
> > Pierre-Alex
> > Sent: Monday, November 24, 2003 2:48 PM
> > To: ccielab@groupstudy.com
> > Subject: IS-IS on ISDN NOT LEGACY !!!
> >
> > Is it possible to configure IS-IS over ISDN NOT using legacy ISDN?
> >
> > My configs trigger the link etc... but the dialer does not manage to
> bind
> > :
> > the whole thing fails after ppp authentication is negotiated
> sucessfully.
> >
> > If you have a working config can you please post?
> >
> > Thanks,
> >
> > Pierre-Alex
> >
> >
> _______________________________________________________________________
> > Please help support GroupStudy by purchasing your study materials
> from:
> > http://shop.groupstudy.com
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:17 GMT-3