From: Phil (ciscostudent1@yahoo.com.br)
Date: Thu Nov 27 2003 - 03:15:52 GMT-3
The CSACS server supplies the dial string. Note the
lcp:callback-dialstring=5552000.
On the CSACS server I have the following selected under
Group:
Cisco IOS/PIX RADIUS Attributes
[check] [009\001] cisco-av-pair
lcp:callback-dialstring=5552000
IETF RADIUS Attributes
[check] [006] Service-Type
Framed
[check] [007] Framed-Protocol
PPP
--- wangstone373 <wangstone373@hotmail.com> escreveu: > in
Callback server, there is no dialer map, how server dial
> back to client?
> ----- Original Message -----
> From: "Phil" <ciscostudent1@yahoo.com.br>
> To: "Zalimas Azaaaz" <zalzal50@yahoo.gr>;
> <ccielab@groupstudy.com>
> Cc: <ciscostudent1@yahoo.com.br>
> Sent: Thursday, November 27, 2003 10:58 AM
> Subject: Re: radius callback
>
>
> > This is my working configuration for radius callback:
> > ===========================================
> > ============= callback client =============
> > ===========================================
> > R4#
> > !
> > version 12.2
> > !
> > hostname R4
> > !
> > username R2 password 0 cisco
> > !
> > isdn switch-type basic-ni
> > !
> > interface BRI0/0
> > ip address 172.16.1.2 255.255.255.252
> > encapsulation ppp
> > no ip route-cache
> > no ip mroute-cache
> > dialer idle-timeout 20
> > dialer map ip 172.16.1.1 name R2 broadcast 5551000
> > dialer load-threshold 1 either
> > dialer-group 1
> > isdn switch-type basic-ni
> > isdn spid1 21255520000101 5552000
> > isdn spid2 21255520010101 5552001
> > no cdp enable
> > no cdp enable
> > ppp callback request
> > ppp authentication chap callback
> > ppp multilink
> > !
> > dialer-list 1 protocol ip permit
> > !
> > end
> > ===========================================
> > ============= callback server =============
> > ===========================================
> > R2#
> > !
> > version 12.2
> > !
> > hostname R2
> > !
> > aaa new-model
> > !
> > !
> > aaa authentication ppp default group radius
> > aaa authorization network default group radius
> > !
> > isdn switch-type basic-ni
> > !
> > interface BRI0/0
> > ip address 172.16.1.1 255.255.255.252
> > encapsulation ppp
> > no ip route-cache
> > no ip mroute-cache
> > dialer idle-timeout 20
> > dialer enable-timeout 2
> > dialer load-threshold 1 either
> > dialer callback-secure
> > dialer-group 1
> > isdn switch-type basic-ni
> > isdn spid1 21255510000101 5551000
> > isdn spid2 21255510010101 5551001
> > no cdp enable
> > ppp callback accept
> > ppp authentication chap callin
> > ppp multilink
> > !
> > dialer-list 1 protocol ip permit
> > !
> > radius-server host 10.1.1.11 key cisco
> > !
> > end
> > R2#
> > ===========================
> > On the CSACS server I have the following selected under
> Group:
> >
> > Cisco IOS/PIX RADIUS Attributes
> > [check] [009\001] cisco-av-pair
> >
> > IETF RADIUS Attributes
> > lcp:callback-dialstring=5552000
> > [check] [006] Service-Type
> > Framed
> > [check] [007] Framed-Protocol
> > PPP
> >
> > All the other options are unchecked and I have Authenticate
> > Using RADIUS (Cisco IOS/PIX) under Network Configuration.
> >
> > HTH,
> >
> > Phil
> >
> >
> > Zalimas Azaaaz <zalzal50@yahoo.gr> wrote:
> > Hi,
> > I am trying to configure my radius server (ACS) to provide
> the
> > isdn callback string to the router.
> >
> > I receive the following:
> >
> > cisco AVPair "lcp:callback-dialstring=384800" not applied
> for
> > multilink
> > cisco AVPair "lcp:callback-dialstring=384800" not applied
> for ip
> >
> > is this normal? Have I forgot something ?
> >
> > the isdn link is established/authenticated but no calllback.
> >
> > Help,
> > Zal
> >
> >
> >
> > ---------------------------------
> > Do You Yahoo!?
> > Apojt^ste tgm dyqe\m sar@yahoo.gr die}humsg sto Yahoo! Mail.
> >
> >
>
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:18 GMT-3