From: CXP Peter (peter@cyscoexpert.com)
Date: Mon Dec 01 2003 - 12:46:51 GMT-3
I remember there was an issue with the spanning tree and HSRP and you had to
enable portfast to fix it.
You might want to look at other issues, too:
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080
094afd.shtml
_____________________________
Peter
#7247 (R&S, Security, SP)
CyscoExpert Corp.
4433 W. Touhy Ave. Suite 410
Lincolnwood, IL 60712
Phone (847) 674-3392
Toll Free (866) CyscoXP (297-2697)
Fax (847) 674-2625
----- Original Message -----
From: "David Hurtado" <deivi78@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Monday, December 01, 2003 5:02 AM
Subject: Weird HSRP problem
> Hello everybody, I have a strange problem with HSRP. I'm putting 2
> routers (R3 and R4), connected thru a Catalyst 3550. I want them to work
> with HSRP, to form a virtual router. I configure HSRP on R3's
> Ethernet and everything goes OK. But when i configure HSRP on R4's
> Fastethernet, the interface starts going up and down continously and the
> router change its HSRP state: Speak -> Standby -> Active. I don't know
> why. Please, give me some advice. Thanks everybody in the group
>
> ------------------------------------------------------------------------
>
> Una mejor experiencia en Internet. Prueba gratis dos meses MSN 8.
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:34 GMT-3