OSPF Network command

From: Mark Rushby (mark@tisolutions.biz)
Date: Tue Dec 02 2003 - 07:23:49 GMT-3

Hi All

Is it acceptable to use the following command when all interfaces on a
router are in the same ospf area:

network 0.0.0.0 255.255.255.255 area 0

Is this ok to use on the lab or is if preferable to specify each network
in separate commands?
I've tried both ways and both produce the same result.

Thanks

mark

This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:34 GMT-3