From: Scott Morris (swm@emanon.com)
Date: Mon Dec 08 2003 - 09:32:38 GMT-3
The answer is "it depends". Whether you are doing simple passthrough,
or setting up a relay, there are different commands involved. At a
mininum, you'll want to be sure you are able to relay DTMF tones
correctly, but there are many other varieties as well.
On the doc CD, check out:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft
/122t/122t11/faxapp/
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
CISSP, JNCIS, et al.
IPExpert CCIE Program Manager
IPExpert Sr. Technical Instructor
swm@emanon.com/smorris@ipexpert.net
http://www.ipexpert.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
John Tafasi
Sent: Monday, December 08, 2003 3:59 AM
To: ccielab
Subject: Simple FAX over IP question
I have two remote fax machines each is connected to an FXS voice port on
a router. The two routers are connected with an IP network.
Is there any SPECIAL VoIP configuration needed to make the two fax
machines to sommunicate with each other?
Thanks
John Tafasi
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:37 GMT-3