From: Andriy Lysyuk (lysyuk@ics.ua)
Date: Wed Dec 10 2003 - 11:14:14 GMT-3
Hello, group
Sorry for little offtopic.
I wonder can Cisco router terminate X.25 over Frame Relay encapsulated
call ?
Under Virtual-template there is a command of X.25 encapsulation but it
is not working
R1(config)#int virtual-template ?
<1-200> Virtual-Template interface number
R1(config)#int virtual-template 1
R1(config-if)#enc
R1(config-if)#encapsulation ?
frame-relay Frame Relay networks
ppp Point-to-Point protocol
slip Serial Line IP
x25 X.25
R1(config-if)#encapsulation x25
Error in encaps setup. Encapsulation not changed.
R1(config-if)#
*Mar 2 01:48:12.717: %X25-3-X25NOTAVAIL: Virtual-Template1 : Lower
layer protoc
ol is not available
R1(config-if)#
R1(config)#x25 route ^1111 interface ?
Async Async interface
BVI Bridge-Group Virtual Interface
CTunnel CTunnel interface
Dialer Dialer interface
FastEthernet FastEthernet IEEE 802.3
Group-Async Async Group interface
Loopback Loopback interface
MFR Multilink Frame Relay bundle interface
Multilink Multilink-group interface
Null Null interface
Port-channel Ethernet Channel of interfaces
Serial Serial
Tunnel Tunnel interface
Vif PGM Multicast Host interface
Virtual-FrameRelay Virtual Frame Relay interface
Virtual-Template Virtual Template interface
Virtual-TokenRing Virtual TokenRing
R1(config)#x25 route ^1111 interface Virtual-Template 1
%%X.25 not configured on interface
R1(config)#
Thank you in advance.
Regards,
Andriy Lysyuk
CCIE #10933
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:38 GMT-3