From: John Tafasi (johntafasi@yahoo.com)
Date: Sat Dec 13 2003 - 23:14:26 GMT-3
Hi Group,
I have strange problem here. I configured the remote peer with a cost of 5,
but the show dlsw capabilities does not reflect the change in the cost.
r6#show run
bridge irb
!
dlsw local-peer peer-id 200.0.0.6 group 2 border
dlsw remote-peer 0 tcp 200.0.0.4 cost 5
dlsw bridge-group 1
r6#show dlsw capabilities ip 200.0.0.4
DLSw: Capabilities for peer 200.0.0.4(2065)
vendor id (OUI) : '00C' (cisco)
version number : 2
release number : 0
init pacing window : 20
unsupported saps : none
num of tcp sessions : 1
loop prevent support : no
icanreach mac-exclusive : no
icanreach netbios-excl. : no
reachable mac addresses : none
reachable netbios names : none
V2 multicast capable : yes
DLSw multicast address : none
cisco version number : 1
peer group number : 1
peer cluster support : yes
border peer capable : yes
peer cost : 3
biu-segment configured : no
UDP Unicast support : yes
Fast-switched HPR supp. : no
NetBIOS Namecache length : 15
local-ack configured : yes
priority configured : no
cisco RSVP support : no
configured ip address : 200.0.0.4
border peer for group 1 : peer 200.0.0.4(2065) cost 3
peer type : conf
version string :
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3620-JK8O3S-M), Version 12.2(10a), RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Tue 21-May-02 12:59 by pwade
r6#
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:40 GMT-3