From: Sasa Milic (smilic2@pexim.co.yu)
Date: Mon Dec 22 2003 - 09:27:07 GMT-3
The problem is that variance alone is not enough to make
multiple paths available for load-balancing - neighbors'
metric to the destination have to be lower than feasible
distance (FD) on this router.
In this case, FD to the destination is 10537472, which
is equal to the metric on router 164.1.13.3, and so
that path is not taken.
Sasa
Peng Zheng wrote:
>
> On the router, I got
>
>
> P 164.1.26.0/24, 1 successors, FD is 10537472, serno
> 65
> via 164.1.12.2 (10537472/281600), Serial0
> via 164.1.13.3 (11049472/10537472), Serial1
>
> by sh ip eigrp topo all
>
> Then I added variance 2 under router eigrp process,
>
> but still only one route appeared in routing table.
>
> I tried max 2 under eigrp process, but no luck.
>
> What should I do to make unequal cost load balancing
> work.
>
> __________________________________
> Do you Yahoo!?
> New Yahoo! Photos - easier uploading and sharing.
> http://photos.yahoo.com/
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:43 GMT-3