From: Richard Gallagher (rgallagh@cisco.com)
Date: Tue Jan 13 2004 - 18:33:42 GMT-3
Try using the "no partition flash:" command:
Rich
----- Original Message -----
From: "mo ddin" <mmm672@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, January 13, 2004 8:36 PM
Subject: 2500 flash upgrade problem.
> Hi group,
>
>
>
> I added 8 MB flash to my 2500, now it is showing two partitions when I am
trying to upgrade 12.2-15 I got this %Error: Image size exceeds flash size.
>
> How do I solve this problem any help will be highly appreciate.
>
>
>
> Thanks in advance.
>
>
>
> Mm
>
>
>
> Here is error message:
>
>
>
> R3CONSOLE(boot)#copy tftp flash
> Partition Size Used Free Bank-Size State Copy
Mode
> 1 8192K 0K 8192K 8192K Read/Write Direct
> 2 8192K 0K 8192K 8192K Read/Write Direct
>
> [Type ?<no> for partition directory; ? for full directory; q to abort]
> Which partition? [default = 1]
>
> System flash directory, partition 1:
> No files in System flash
> [0 bytes used, 8388608 available, 8388608 total]
> Address or name of remote host [192.168.254.2]?
> Source file name? c2500-is-l.122-15.T10.bin
> Destination file name [c2500-is-l.122-15.T10.bin]?
> Accessing file 'c2500-is-l.122-15.T10.bin' on 192.168.254.2...
> Loading c2500-is-l.122-15.T10.bin from 192.168.254.2 (via Ethernet0): !
[OK]
>
> Erase flash device before writing? [confirm]
> %Error: Image size exceeds flash size
>
>
>
>
> ---------------------------------
> Do you Yahoo!?
> Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:44 GMT-3