From: Nigel.Johnson@barclayscapital.com
Date: Thu Jan 29 2004 - 07:01:24 GMT-3
Download the Errata for this book as I seem to recall that this is one of
the many errors.
http://www.ciscopress.com/catalog/product.asp?product_id={9E5835BB-4972-4956
-B7F7-B4C8AE56C918}&session_id={C0F02AA8-5D19-4A17-87E0-AA19F98BEAE0}
Cheers,
Nigel
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Karim
Sent: 29 January 2004 01:41
To: ccielab@groupstudy.com
Subject: DLSw question - filtering SAPs??
Hi all,
-- Refrering to CCIE practical studies (vol.1), chapter 13:
To permit only known SNA SAPs, use: access-list 200 permit 0x0d0d 0x0000 To
permit only NetBIOS SAPs, use: access-list 200 permit 0xF0F0 0x0101
If it is required to permit both of them in one statement, the book states
that the following access-list is enough: access-list 200 permit 0x0d0d (the
same that was used to permit the SNA SAPs).
I don't understand from where this comes from ??
-- Also regarding permiting SNA SAPs, is the following access-lists are
equivilant to each other ??
First: access-list 200 permit 0x0000 0x0d0d
Second: access-list 200 permit 0x0d0d 0x0000
Waiting for your help ;)
Karim.
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:51 GMT-3