Qos - ip phone

From: Paul Chen (cpjchen@starhub.net.sg)
Date: Sun Feb 01 2004 - 00:20:49 GMT-3

• Next message: Subramanian, Muralidharan: "CCIE LAB Equipments"
• Next in thread: Richard Davidson: "Re: Qos - ip phone"
• Maybe reply: Richard Davidson: "Re: Qos - ip phone"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi,

I have this question:

1: change cos of ip phone to 1
2: mantain the cos of pc attached to phone

Here is my solution:

Int f0/x

Switchport mode access

Switchport access vlan x

Switchport voice vlan x

Mls qos trust cos

Switchport priority extend trust <----- maintain cos value of pc attached
to phone

Switchport priority extend cos 1 <----------

I can't configure both the switchport priority extend commands together .
When I do a show run the only thing that shows is the switchport priority
extend cos 1

How do you change the cos value of the ip phone ? Is is not that the
switchport priority extend cos command is only meant for data frames only ?

Any help appreciated.

Thanks.

Paul

• Next message: Subramanian, Muralidharan: "CCIE LAB Equipments"
• Next in thread: Richard Davidson: "Re: Qos - ip phone"
• Maybe reply: Richard Davidson: "Re: Qos - ip phone"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:44 GMT-3