Re: How do I block VLAN 1002-1005 in IOS 12.2

From: MADMAN (dmadlan@qwest.com)
Date: Mon Feb 02 2004 - 13:54:49 GMT-3

• Next message: Brian McGahan: "RE: Multicast Question"
• Previous message: kasturi cisco: "RE: AS-Path Filtering with BGP Confiderations!"
• Maybe in reply to: iwan: "How do I block VLAN 1002-1005 in IOS 12.2"
• Next in thread: Brian McGahan: "RE: How do I block VLAN 1002-1005 in IOS 12.2"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   something like this:

C3550-L3(config-if)#switchport trunk allowed vlan remove 1002-1005

C3550-L3#wr t
Building configuration...

Current configuration : 3099 bytes
!
blah blah blanh
!
interface GigabitEthernet0/1
  switchport trunk encapsulation dot1q
  switchport trunk allowed vlan 1-1001,1006-4094
  switchport mode trunk
  no ip address

   Dave

iwan wrote:

> Hi,
>
> When I want to allow specific VLANS trough a Trunk I need to do this
> command:
>
> "switchport trunk allwoed vlan 3, 1002-1005"
>
> I dont want to put in the 1002-1005 part...
>
> How do I block this?
>
> Thanks
>
>
> Iwan Hoogendoorn
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>

-- 
David Madland
CCIE# 2016
Sr. Network Engineer
Qwest Communications
612-664-3367
"Emotion should reflect reason not guide it"

• Next message: Brian McGahan: "RE: Multicast Question"
• Previous message: kasturi cisco: "RE: AS-Path Filtering with BGP Confiderations!"
• Maybe in reply to: iwan: "How do I block VLAN 1002-1005 in IOS 12.2"
• Next in thread: Brian McGahan: "RE: How do I block VLAN 1002-1005 in IOS 12.2"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:45 GMT-3