From: ccie2be (ccie2be@nyc.rr.com)
Date: Mon Feb 02 2004 - 15:21:47 GMT-3
Hi all,
This is a follow up to my earlier post.
Suppose I have the following topology:
R1 ---Area 0 ---- R2 --- Area 1 --- R3 --- Area 2 --- R4
|----- Ethernet ----|
A virtual link configured on R2 and R3 connects Area 2 with the Backbone Area
0. If any OSPF timers are changed on R2 and R3 Ethernet interface, does the
timer has to be changed on the virtual link as well. If the Hello interval is
changed on R2's and R3's Ethernet interface to area 1, does the Hello Interval
on the virtual link ( which uses the physical Ethernet link) also have to be
changed?
Thanks in advanced, dt
This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:45 GMT-3