From: Michael Snyder (msnyder@revolutioncomputer.com)
Date: Sun Feb 08 2004 - 18:11:50 GMT-3
Using the requirements for Voip
Port Speed 64000
CIR 32000
Tc 10 ms
map-class frame-relay voip
frame-relay cir 32000
frame-relay bc 320
frame-relay be 0
frame-relay mincir 32000
no frame-relay adaptive-shaping
frame-relay fragment 320
fragment type end-to-end fragment size 320
cir 32000 bc 320 be 0 limit 40 interval 10
mincir 32000 byte increment 40 BECN response no
frags 22 bytes 1561 frags delayed 17 bytes delayed
1201
1) Will the fragment size always equal Bc?
2) Should I use the `frame-relay ip rtp priority 16384 16383 32` with my
class or add my own priority queue to the physical interface?
There's no firm requirements, just trying to figure out a good way of
doing it.
http://www.cisco.com/en/US/tech/tk652/tk698/technologies_tech_note09186a
00800d6788.shtml
Michael Snyder
Lead Network Engineer
CCNP/DP, CSS1, MCSE NT/2000
Revolution Computer Systems
(270) 443-7400
This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:47 GMT-3