CBWFQ

From: Airalgerie123@aol.com
Date: Fri Feb 13 2004 - 06:39:59 GMT-3

• Next message: Barry Nolan: "OT: ISDN Sim - Elmeg D@vros-44.net"
• Previous message: Marko Berend: "RE: Repost: cat 3550 L3 Port security"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi all

The following link states, when u enable CBWFQ on physical serial interface u ovveride the default WFQ. My example below shows the opposite.
It also states u cannot enable CBWFQ on ethernet subifs.

http://www.cisco.com/en/US/customer/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a00800b75a9.html#1001203

interface Serial3/3:0
 ip address 192.168.186.1 255.255.255.252
 ip access-group Serial3/3:0 in
 ip verify unicast reverse-path
 service-policy input SAM
 load-interval 30
 fair-queue 64 16 0
 no cdp enable
*******************************
interface FastEthernet0/0.510
  encapsulation dot1Q 510
  ip address 10.141.39.233 255.255.255.248
  service-policy input TAG
 service-policy output TEST
 
Any comments ?

Cheers

Sam

• Next message: Barry Nolan: "OT: ISDN Sim - Elmeg D@vros-44.net"
• Previous message: Marko Berend: "RE: Repost: cat 3550 L3 Port security"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:49 GMT-3