From: Kaiser anwar (kaiseranwar@sbcglobal.net)
Date: Mon Feb 16 2004 - 13:03:34 GMT-3
Ahemd,
You have only one mapping for the spids in your config.
dialer map ip 183.1.45.5 name Rack1R5 broadcast 552221
you will need the second mapping on both sides. Thanks
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Ahmed Mustafa
Sent: Monday, February 16, 2004 1:37 AM
To: kaiseranwar@sbcglobal.net; ccielab@groupstudy.com
Subject: Re: PPP with Multilink
Kaiser/Bill,
According to InterneworkExpert Workbook, Either the "Dialer Load-Threshold
or PPP multilink link-min 2" could achieve the desired results. I also
tried, "Load-Threshold command, but no luck.
----- Original Message -----
From: "Kaiser anwar" <kaiseranwar@sbcglobal.net>
To: "'Ahmed Mustafa'" <ahmed.mustafa@sbcglobal.net>;
<ccielab@groupstudy.com>
Sent: Sunday, February 15, 2004 11:09 PM
Subject: RE: PPP with Multilink
>
>
> You will need to use dialer load-threshold command to bring the second B
> channel up. I don't see that in your config.
>
> Thanks
> Kaiser
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Ahmed Mustafa
> Sent: Monday, February 16, 2004 12:56 AM
> To: ccielab@groupstudy.com
> Subject: PPP with Multilink
>
> I am not able to bring up both both B channels. When I generate a normal
> ping
> or extended ping with big datagram size, and still it will only bring one
> channel up, not both of them. Please see my config below, and let me
know
> if
> there are any errors. I am using Astricom ISDN Simulator, not a true ISDN
> Switch. Is is because of that.
>
> Thanks,
>
>
>
> R4
> ----------------------------------------------------
> interface BRI0
> ip address 183.1.45.4 255.255.255.248
> encapsulation ppp
> ip ospf demand-circuit
> dialer map ip 183.1.45.5 name Rack1R5 broadcast 552221
> dialer-group 1
> isdn switch-type basic-ni
> isdn spid1 30355511110101
> isdn spid2 30355511120101
> ppp authentication pap
> ppp pap sent-username Rack1R4 password 0 CISCO
> ppp multilink
> ppp multilink links-min 2
> --------------------------------------------------------------------------
-- > - > ------ > > R5 > -------------------------------------------------------------------------- -- > - > ----- > > interface BRI0 > ip address 183.1.45.5 255.255.255.248 > encapsulation ppp > ip ospf demand-circuit > dialer idle-timeout 180 either > dialer map ip 183.1.45.4 name Rack1R4 broadcast 5551111 > dialer-group 1 > isdn switch-type basic-ni > isdn spid1 30355522220101 > isdn spid2 30355522210101 > ppp authentication pap > ppp pap sent-username Rack1R5 password 0 CISCO > ppp multilink > multilink min-links 2 > > _______________________________________________________________________ > Please help support GroupStudy by purchasing your study materials from: > http://shop.groupstudy.com > > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:50 GMT-3