From: Michael Snyder (msnyder@revolutioncomputer.com)
Date: Fri Feb 20 2004 - 02:15:01 GMT-3
Classic 3550 mtu size mismatch with ospf hellos.
Question - The solution showed `ip ospf mtu-ignore`
But instead I just matched the correct mtu size on the vlan interface
going to my ospf neighbors.
interface Vlan904
ip address 136.10.56.10 255.255.255.240
ip mtu 1500
ip ospf priority 0
Neighbor ID Pri State Dead Time Address
Interface
136.10.5.5 255 FULL/BDR 00:00:32 136.10.56.5
Vlan904
136.10.6.6 1 FULL/DR 00:00:37 136.10.56.6
Vlan904
Does this affect anything else on the switch? I'm thinking shouldn't
effect trunking, etc; since the system mtu is still showing in the
config as the standard 3550 value.
spanning-tree extend system-id
system mtu 1504
Any cons or benefits to my direct solution?
Thanks for your time in advance,
Michael
This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:51 GMT-3