From: Adel Abushaev (adel@netmasterclass.net)
Date: Wed Feb 25 2004 - 22:57:01 GMT-3
It goes into level-2 by default.You may check it by bringing adjacency
level-2 between R1 and R6. To make it working
with level-1 use this:
router isis
redustribute connected level-1 route-map connected2isis
Adel Abouchaev
CCIE# 12037, MCSE
http://www.netmasterclass.net
----- Original Message -----
From: "Ahmed Mustafa" <ahmed.mustafa@sbcglobal.net>
To: <ccielab@groupstudy.com>
Sent: Wednesday, February 25, 2004 7:01 PM
Subject: redistribute Loopbacks
> Is there anything other than simply use the following commands.
>
> R1 and R6 are connected via ISIS Level-1 only.
>
> on R6, I have a loopback interface 6 configured with 132.1.6.0/24, and I
> redistributed via redistributed connected method.
>
> r6
>
> router isis
> redistributed connected route-map connected2isis
>
>
> route-map connected2isis permit 10
> match interface loopback 6
>
> But the route will not appear on R1.
>
> Any advise !
>
> Regards,
>
> Ahmed
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Mar 05 2004 - 07:13:57 GMT-3