From: Mark Rushby (mark@tisolutions.biz)
Date: Wed Mar 10 2004 - 17:49:35 GMT-3
Hi All
I am trying to config 2 HSRP standby groups on the same interface (E0). And i'm getting the following error message: Any ideas?
% Interface hardware cannot support multiple groups
R6#sh vers
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-JS-L), Version 12.2(7a), RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Thu 21-Feb-02 01:22 by pwade
Image text-base: 0x03079498, data-base: 0x00001000
ROM: System Bootstrap, Version 11.0(10c)XB2, PLATFORM SPECIFIC RELEASE SOFTWARE
(fc1)
BOOTLDR: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c)XB2, PLATFORM SP
ECIFIC RELEASE SOFTWARE (fc1)
R6 uptime is 6 minutes
System returned to ROM by reload
System image file is "flash:c2500-js-l.122-7a.bin"
cisco 2500 (68030) processor (revision D) with 16384K/2048K bytes of memory.
Processor board ID 02234200, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
2 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)
Configuration register is 0x2102
TIA
Mark
This archive was generated by hypermail 2.1.4 : Thu Apr 01 2004 - 08:15:17 GMT-3