From: Arifur Rahman (arahman@cisco.com)
Date: Fri Apr 09 2004 - 04:42:38 GMT-3
Hi
Did you notice that your isdn is not working properly
....
Layer 1 Status:
DEACTIVATED
Layer 2 Status:
Layer 2 NOT Activated
TEI Not Assigned, ces = 1, state = 3(await establishment)
spid1 configured, spid1 NOT sent, spid1 NOT valid
.....
thank you - Arif
At 10:37 PM 4/8/2004 -0400, ccie2002@bellsouth.net wrote:
>All:
>
>I am working on the internetwork lab and I am having problems
>with my isdn. The goal is go have the frame relay go down. Once
>the frame relay goes down, the isdn should kick in with
>PPP callback. The isdn is a backup interface. To try to
>jump start the isdn, I went to the remote side and downed
>the frame relay link. However, my isdn would not kick in.
>Any suggestions on why it is not working.
>
>****************************** Router 5 *********************
>
>Cisco2503_R5#show isdn status
>Global ISDN Switchtype = basic-ni
>ISDN BRI0 interface
> dsl 0, interface ISDN Switchtype = basic-ni
> Layer 1 Status:
> DEACTIVATED
> Layer 2 Status:
> Layer 2 NOT Activated
> TEI Not Assigned, ces = 1, state = 3(await establishment)
> spid1 configured, spid1 NOT sent, spid1 NOT valid
> Layer 3 Status:
> 0 Active Layer 3 Call(s)
> Active dsl 0 CCBs = 0
> The Free Channel Mask: 0x00000000
> --More--
>
>
>
>username ROUTER4 password 0 cisco
>
>interface BRI0
> description port B s1 40822222221 s2 40822222222
> ip address 132.1.45.5 255.255.255.248
> ip router isis
> encapsulation ppp
> dialer map clns 49.0035.0006.0006.00 name ROUTER4 broadcast 4082222222
> dialer map ip 132.1.45.4 name ROUTER4 broadcast 4082222222
> dialer-group 1
> isdn switch-type basic-ni
> isdn spid1 40811111111 4081111111
> ppp callback request
> ppp authentication chap callout
> ppp chap hostname ROUTER5
> ppp multilink
> isis circuit-type level-2-only
>end
>
>
>
>
>Cisco2503_R5#
>Cisco2503_R5#sh run int s0.1
>Building configuration...
>
>Current configuration : 186 bytes
>!
>interface Serial0.1 point-to-point
> backup interface BRI0
> ip address 132.1.35.5 255.255.255.0
> ip router isis
> frame-relay interface-dlci 513
> isis circuit-type level-2-only
>end
>
>Cisco2503_R5#
>
>
>
>**************************** Router 4 configs below **********************
>username ROUTER5 password 0 cisco
>
>
>
>
>interface BRI0
> description port A s1 40811111111 s2 40811111112
> ip address 132.1.45.4 255.255.255.248
> ip router isis
> encapsulation ppp
> dialer idle-timeout 0
> dialer map clns 49.0035.0005.0005.00 name ROUTER5 broadcast 4081111111
> dialer map ip 132.1.45.5 name ROUTER5 class CALLBACK 4081111111
> dialer-group 1
> isdn switch-type basic-ni
> isdn spid1 40822222222 4082222222
> cdapi buffers regular 0
> cdapi buffers raw 0
> cdapi buffers large 0
> ppp callback accept
> ppp authentication chap callin
> ppp chap hostname ROUTER4
> ppp multilink
>
>
>
>dialer-list 1 protocol ip permit
>
>
>map-class dialer CALLBACK
> dialer callback-server username
>
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>http://shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:44 GMT-3