From: Yasser Abdullah (yasser@alharbitelecom.com)
Date: Fri Apr 23 2004 - 05:51:54 GMT-3
The first command would specify the recipient of the traps and the type
or traps to be sent. However, no traps will be sent for any of the
notifications above until you configure the' snmp-server enable traps'
for at least one notification type.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/
ffun_r/ffrprt3/frf014.htm#1113568
HTH,
Yasser
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Tim Last
Sent: Friday, April 23, 2004 12:26 AM
To: Group Study
Subject: Specifying SNMP Traps
Hi guys,
I found this example here:
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a
0080094a05.shtml
snmp-server host 10.10.10.10 public config bgp tty snmp-server enable
traps config snmp-server enable traps bgp
I understand why the 1st first command is there, but why are the other 2
commands needed? Isn't it enough that that both "config" and "bgp" in
the 1st command?
Or, is it really necessary to specify "config" and "bgp" twice, once
in the 1st command and again in the enable traps command.
Thanks in advance, Tim
---------------------------------
Do you Yahoo!?
Yahoo! Photos: High-quality 4x6 digital prints for 25"
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:53 GMT-3