From: Moffat, Ed (EMoffat@fsci.com)
Date: Wed May 05 2004 - 17:20:57 GMT-3
The first thing I see is that the dialer strings point to themselves. The
strings should point to the called router.
I assume also that you are replacing the sample configs with the actual
spids and dial strings on your equipment?
-Ed-
-----Original Message-----
From: CCIE Canidate [mailto:cisco@heartofdarknessstudios.com]
Sent: Wednesday, May 05, 2004 1:09 PM
To: ccielab@groupstudy.com
Subject: Having trouble with Kaslow's ISDN example
I have been trying to make the basic ISDN config in Kaslow's book to work,
but am having issues. This is my config:
R1:
interface BRI0
ip address 172.16.1.1 255.255.255.0
encapsulation hdlc
dialer string 2222
dialer-group 1
isdn switch-type basic-ni
isdn spid1 22220101 2222
dialer-list 1 protocol ip permit
R2:
interface BRI0
ip address 172.16.1.2 255.255.255.0
no ip directed-broadcast
dialer string 1111
dialer-group 1
isdn switch-type basic-ni
isdn spid1 11110101 1111
dialer-list 1 protocol ip permit
----------------------------------END
I am trying to make this basic config work between 2 devices and am getting
stuffed. Can somebody point me in the right direction?
Thanks!
ISDN Challenged guy
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:05 GMT-3