From: Mohamed (nmohamed@cisco.com)
Date: Mon May 10 2004 - 11:34:05 GMT-3
I feel manipulating is different from adding.
I really dint get your question,pls come again Richard
Thanks
Mohamed
-----Original Message-----
From: Richard Dumoulin [mailto:richard.dumoulin@vanco.es]
Sent: Monday, May 10, 2004 8:00 PM
To: Mohamed; 'Yasser Abdullah'; groupstudy@cconlinelabs.com;
ccielab@groupstudy.com
Subject: RE: BGP Aggregate AS-Path Prepend
But when not set, is an attribute empty or missing ?
-----Original Message-----
From: Mohamed [mailto:nmohamed@cisco.com]
Sent: lunes, 10 de mayo de 2004 16:19
To: 'Yasser Abdullah'; groupstudy@cconlinelabs.com;
ccielab@groupstudy.com
Subject: RE: BGP Aggregate AS-Path Prepend
Hi Yasser,
The attribute map command is to manipulate the BGP attributes,that is
what I believe,so you can modify any BGP attributes,but cant add any
more attributes,pls correct if iam wrong. Thanks Mohamed.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Yasser Abdullah
Sent: Monday, May 10, 2004 6:02 PM
To: groupstudy@cconlinelabs.com; ccielab@groupstudy.com
Subject: Re: BGP Aggregate AS-Path Prepend
R2(AS1)-------R3(AS2)
R1 sends R2 150.2.2.0/24. In R2, I'm creating the aggregate
150.2.0.0/16. I'm trying to manually set the as-path of the aggregate
route. That is, I don't want to use the as-set key work, rather a
route-map with the as prepend set feature.
Here is the command:
aggregate-address 150.2.0.0 255.255.0.0 attribute-map prepend
route-map prepend permit 10
set as-path prepend 1
I keep getting the same error.
Thanks,
Yasser
----- Original Message -----
From: "Tony Schaffran" <groupstudy@cconlinelabs.com>
To: "'Yasser Abdullah'" <yasser@alharbitelecom.com>;
<ccielab@groupstudy.com>
Sent: Monday, May 10, 2004 3:23 PM
Subject: RE: BGP Aggregate AS-Path Prepend
What is the exact command you are trying to issue? Could you paste your
config?
Tony Schaffran
Network Analyst
CCIE #11071
CCNP, CCNA, CCDA,
NNCDS, NNCSS, CNE, MCSE
www.cconlinelabs.com
Your #1 choice for online Cisco rack rentals.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Yasser Abdullah
Sent: Monday, May 10, 2004 5:15 AM
To: ccielab@groupstudy.com
Subject: BGP Aggregate AS-Path Prepend
Is it possible to prepend an AS path to a locally originated aggregate
route? What I'm trying to do is manually retain the as path without
using the as-set keyword.
I keep getting the following error when using a route/attribute map with
the aggregate-address command:
% "prepend" used as BGP attribute route-map, set as-path prepend not
supported
Many Thanks,
Yasser
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:08 GMT-3