From: Yasser Aly (blackyeyes00@hotmail.com)
Date: Thu May 27 2004 - 19:32:31 GMT-3
Dear All,
R1 is supposed to be a mapping agent where
R3 is candidate RP for ( 239.0.0.0/8)
R5 is candidate RP for ( 226.0.0.0 --> 238.255.255.255 )
Checking from the mapping agent, I would like to know what does the (-) sign
that appear in the output below means ?
Rack1R1# sh ip pim rp mapping
PIM Group-to-RP Mappings
This system is an RP-mapping agent (Loopback0)
Group(s) (-)224.0.0.0/7
RP 150.1.5.5 (?), v2v1
Info source: 150.1.5.5 (?), elected via Auto-RP
Uptime: 00:53:36, expires: 00:02:19
Group(s) 224.0.0.0/4
RP 150.1.5.5 (?), v2v1
Info source: 150.1.5.5 (?), elected via Auto-RP
Uptime: 00:53:36, expires: 00:02:20
Group(s) 239.0.0.0/8
RP 150.1.3.3 (?), v2v1
Info source: 150.1.3.3 (?), elected via Auto-RP
Uptime: 00:53:37, expires: 00:02:20
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:18 GMT-3