From: Nikolai Tsankov (ntsankov@san.rr.com)
Date: Mon May 31 2004 - 11:59:34 GMT-3
Thank you, Tony - that explains it all.
Regards,
Nikolai Tsankov
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Tony Schaffran
Sent: Sunday, May 30, 2004 6:21 AM
To: 'Tony Schaffran'; 'Nikolai Tsankov'; 'Groupstudy Email (E-mail)'
Subject: RE: 2600 & FXS question
Actually, disregard my last.
The NM-HD-1V will not operate in a non XM 2600.
This link describes what platform and what IOS you need to recognize that
module.
http://www.cisco.com/en/US/customer/products/hw/modules/ps5365/products_data
_sheet09186a0080191d41.html
Cheers,
Tony Schaffran
Network Analyst
CCIE #11071
CCNP, CCNA, CCDA,
NNCDS, NNCSS, CNE, MCSE
www.cconlinelabs.com
Your #1 choice for online Cisco rack rentals.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Tony
Schaffran
Sent: Sunday, May 30, 2004 6:03 AM
To: 'Nikolai Tsankov'; 'Groupstudy Email (E-mail)'
Subject: RE: 2600 & FXS question
You will need an IOS with a PLUS feature set. If that does not work, you
may have a bad NM module or FXS card.
Tony Schaffran
Network Analyst
CCIE #11071
CCNP, CCNA, CCDA,
NNCDS, NNCSS, CNE, MCSE
www.cconlinelabs.com
Your #1 choice for online Cisco rack rentals.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Nikolai Tsankov
Sent: Saturday, May 29, 2004 2:17 PM
To: Groupstudy Email (E-mail)
Subject: 2600 & FXS question
Has anyone been able to make these models 2600 recognize the FXS ports
listed below with any 12.2 IOS?
----------------------------------------------------------------------------
---------
R1: cisco 2621 (MPC860) processor (revision 0x200) with 60416K/5120K bytes
of memory.
16384K bytes of processor board System flash (Read/Write)
----------------------------------------------------------------------------
---------
R2: cisco 2611 (MPC860) processor (revision 0x202) with 61440K/4096K bytes
of memory.
16384K bytes of processor board System flash (Read/Write)
----------------------------------------------------------------------------
---------
NM-HD-1V (Carrier module)
VIC2-2FXS (FXS ports)
-------------------------
We couldn't get a clear answer from Cisco's Website.
Thanks,
Nikolai Tsankov
niko@4ovek.com
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:19 GMT-3